Re: [foxboro] WYSE 5150SE Setup
- From: "Mueller, Jim D." <JDMueller@xxxxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Fri, 4 May 2007 12:14:13 -0400
Steve,
=09My dmcfg file contains the following:
*****************************************************************
TYPE XtermOperator DSM O -
NAME MN5108 XT5108 xt5108 XtermOperator
*****************************************************************
xt5108 is listed in the /etc/hosts file
This is the only time that I have had a problem dedicating a DM using
this type of configuration.
The 51G box has a Font server on it, that is how I am getting the
correct DM fonts to the WYSE box
Thanks for the information!
James Mueller
Senior Process Control Engineer
Cliffs Michigan Mining Co.
(906) 475-3534
JDMueller@xxxxxxxxxxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Murray, Steve
Sent: Friday, May 04, 2007 11:41 AM
To: 'foxboro@xxxxxxxxxxxxx'
Subject: Re: [foxboro] WYSE 5150SE Setup
Hi James,
My dmcfg file contains the following:
*****************************************************************
SCREEN xterm tapper
TYPE XTBOOT FSM O -
NAME 3FFAW1 3FFA12 $xterm XTBOOT
AMNAME 3FFAW1 3FFA12 - AMVIEWONLY
*****************************************************************
Changes to dmcfg require a reboot.
"tapper" is listed in the /etc/hosts file
=20 This works to serve up a dedicated screen. Fonts in FoxView look
terrible
though, and I still have not found a way to get the Display Manager IA
fonts
loaded in a Wyse terminal.
Steve Murray
Asarco
-----Original Message-----
From: Mueller, Jim D. [mailto:JDMueller@xxxxxxxxxxxxxxxxxxxx]
Sent: Friday, May 04, 2007 8:10 AM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] WYSE 5150SE Setup
Group,
=09I am in the process of setting up a WYSE 5150SE box to use as an
xterminal on a 51G box. It has been pretty straight forward so far and
I am
Able to bring up a display manager with no problem. The problem that I
am having is that the WYSE box should be opening a dedicated display
manager, but does not.
=09The WYSE box is listed in the host table, and the dmcfg file is
configured to dedicate a display to the WYSE box. Has anyone else run
into a problem like this before.
Any Help would be appreciated!
James Mueller
Senior Process Control Engineer
Cliffs Michigan Mining Co.
(906) 475-3534
JDMueller@xxxxxxxxxxxxxxxxxxxx
########################################################################
####
###
This electronic message and any attachments included with this message
are
for the exclusive use of the individual or entity to which it is
intended
to be addressed. This message may contain information that is privileged
or
confidential and thereby exempt and protected from unauthorized
disclosure
under applicable law. If the reader of this message is not the intended
recipient, or an employee or agent responsible for delivering the
message to
the intended recipient, be aware that any disclosure, dissemination,
distribution or copying of this communication, or the use of its
contents,
is not authorized and is strictly prohibited. If you have received this
communication and are not the intended recipient, please notify the
sender
immediately and permanently delete the original message from your e-mail
system.
########################################################################
####
###
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin=
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave=
=20
------------------------------------------------------------------------
----
----
This e-mail message has been scanned for Viruses and Content=20
and cleared by MailMarshal. If this is spam please forward=20
this message to spam@xxxxxxxxxx so that we may evaluate it=20
and block future messages.
------------------------------------------------------------------------
----
----
*
This e-mail and any files transmitted with it are the property of ASARCO
LLC and/or its affiliates, are confidential, and are intended solely for
the use of=20
the individual or entity to whom this e-mail is addressed. If you are
not a named recipient or otherwise have reason to believe that you have
received this message in error,=20
please notify the sender and delete this message immediately from your
computer. Any other use, retention, dissemination forwarding, printing
or copying of this e-mail is=20
strictly prohibited. Although this email and any attachments are
believed to be free of any virus or other defect that might affect any
computer system into which it is=20
received, and opened, it is the responsibility of the recipient to
ensure that it is virus free and no responsibility is accepted by ASARCO
LLC and/or its=20
affiliates for any loss or damage arising in any way from its use
This e-mail has been scanned and cleared by MailMarshal=20
www.marshal.com
*
=20
=20
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
=20
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin=
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave=
=20
#########################################################################=
######
This electronic message and any attachments included with this message ar=
e
for the exclusive use of the individual or entity to which it is intende=
d
to be addressed. This message may contain information that is privileged =
or
confidential and thereby exempt and protected from unauthorized disclosur=
e
under applicable law. If the reader of this message is not the intended
recipient, or an employee or agent responsible for delivering the message=
=20to
the intended recipient, be aware that any disclosure, dissemination,
distribution or copying of this communication, or the use of its contents=
,
is not authorized and is strictly prohibited. If you have received this
communication and are not the intended recipient, please notify the sende=
r
immediately and permanently delete the original message from your e-mail
system.
#########################################################################=
######
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
