Thanks Rene! Main culprit for the high OMSCAN seems to be InBatch (redundant). If we switch it off OMSCAN drops from 12 to 3 Unfortunately changing the InBatch read delta as a test didn't improve anything to the load. So we haven't really got a solution for this problem yet. Rgds, Dirk -----Oorspronkelijk bericht----- Van: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] Namens Bakker, René Verzonden: dinsdag 3 maart 2015 11:03 Aan: foxboro@xxxxxxxxxxxxx Onderwerp: Re: [foxboro] Station block parameters - OMSCAN I/A 8.7-ZCP270 Hello Dirk (and everybody else interested), A little late but I hope not too late: The delta value you see is a 32 bit floating point. Google "IEEE-754 analysis" and you get to a website that allows you to do the conversion to decimal. Example: 3F800000 in hex should yield 1.0000 in decimal. Good luck, René Bakker - Schneider-Electric EMEATAC - Baarn - the Netherlands -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Pulas, Philip Sent: Wednesday, February 18, 2015 4:43 PM To: 'foxboro@xxxxxxxxxxxxx' Subject: Re: [foxboro] Station block parameters - OMSCAN I/A 8.7-ZCP270 Dirk, You're welcome. For the delta change, I'm not sure how to interpret it. Hopefully someone else knows. I've mainly used the script to find points not scanning properly. Thanks, Philip Pulas Lead Engineer, Process Systems Tesoro Golden Eagle Refinery *** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave ________________________________ Lawter Notice: The information (including any attachments) contained in this communication is confidential, private and proprietary, may be privileged or otherwise protected by applicable law or legal rule, and is intended only for the use of the addressee(s). Unauthorized use, disclosure, distribution or copying is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately by reply e-mail, or by calling the sender, and then delete it completely from your system. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave