To answer my own question, in case anyone else benefits: I got a refurbished HP 6122, hooked it up, turned it on, and it works perfectly, no need to install new drivers or anything. I count that as a big plus for those of us who still use legacy systems. -Joe -----Original Message----- Sent: Thursday, February 19, 2015 4:40 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] replacing hp 6122 printer Anyone know if there's any problem getting any ol' refurbished hp 6122 deskjet printer (from Amazon, etc) to replace an old one on the DCS? The one we have is connected by parallel cable to a P79 AW (but can be used to print from any workstation on the nodebus), and this printer has been very finicky lately. I want to avoid having to reinstall drivers, redo software configuration, etc, if possible. -Joe _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave