Check out Darryl Bond's contribution on the Cassandra Project: http://www.thecassandraproject.org/archive/dmstat.html Duc -- Duc M. Do Dow Corning Corp. Carrollton Plant Carrollton, KY, US -----Original Message----- From: Brian Bates [mailto:batesb@xxxxxxxxxxx] Sent: Tuesday, October 07, 2003 2:13 PM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] DM_Usage Hi all. I would like to get the information presented in the DM_Usage display from the command-line, when there are no DM's avaiable. I have found that if I call up the DM_Usage display from a DM, then run strings on the data file "/usr/fox/wp/data/<AWLBUG>/<DMNAME>/viewdm.readfile" , I get the information that I need. The problem is that the information in the viewdm.readfile is only updated when the DM_Usage file is selected on a running DisplayManager. I need to see this information when I cannot access a DM. . Does anybody know how to update the viewdm.readfile from the command-line? -Regards, Brian Bates Bowater Inc. Thunder Bay, ON _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave