Re: [foxboro] Best method for remote read-write DM/AM?
- From: "Ron Schafer" <rschafer@xxxxxxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Fri, 25 May 2007 07:44:12 -0400
Corey,
Thought I would point out how I am launching Foxview kind of customized
to each user's choice. Its based on the local computer name they are on.
== $CLIENTNAME millpc setenv DM_LOCAL N
== $CLIENTNAME millpc setenv ENV1 /opt/customer/env/TMPOperator.env
== $CLIENTNAME millpc dmcmd enable omsets
== $CLIENTNAME millpc dmcmd enable clralm
These are what I have in the fv_cmds file to put the Foxview into
particular environments for each user. This will check the remote
machines name and set the environment based on it. I believe you can
also use the logon username too, but I haven't tried it. I wonder if it
is best to set the am permissions here too or in the environment file?
We don't care about the alarms on our remotes but it should work here
too.
Ronald G. Schafer
10026 Old Ridge Rd.
Ashland Va. 23009
804-227-4034
-- No attachments (even text) are allowed --
-- Type: text/x-vcard
-- File: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx
-- Desc: rschafer@xxxxxxxxxxxxxxxxxxxxxxxxxx
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
