Just shutdown the WP into single usr mode and cd /usr/local and then type backup AWLTBG (meaning AW LetterBug) and it should do a level 0 dump over the Nodebus to the AW. Be careful this doesn't overload the NodeBus. It's not always a recommended procedure. ----- Original Message ----- From: "Baptiste, Nigel" <NBaptiste@xxxxxxxxxxxxxx> To: <foxboro@xxxxxxxxxxxxx> Sent: Thursday, April 27, 2006 5:18 PM Subject: [foxboro] 51 series remote backups Hello List, Here's an easy one (I suspect!). How do I do remote backups (WP's especially) over the nodebus. The external tape drive is connected to the AW and at present I've been = moving it to each of the other WP's (which is difficult as the equipment = panel does not have rear doors) in order to do the backups. I have read some of the documentation but would appreciate a = step-by-step. Thanks, NB. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave