[duxuser] Re: Another Situation: Learning to Use My Juliet Pro 60
- From: "Steve Dresser" <s.dresser@xxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Thu, 18 Jul 2013 20:09:59 -0400
Actually, you don't need to have the paper coming out of the other side of
the embosser. However, once you've placed the paper under the metal plate
and on the tractor guides, and turned the embosser on, there's one more
thing to do:
After the embosser has completed its startup sequence, press the OL button
to take the printer off line. Then, press 2 followed by the E key
(immediately to the right of the 0). The embosser will say, "finding top of
form" and the paper will move back and forth until it is correctly
positioned. The embosser will come back on line, and you're good to go.
Steve
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to duxuser-request@xxxxxxxxxxxxx . You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting www.freelists.org . The list archive
* is also located there.
* Duxbury Systems' web site is www.duxburysystems.com
* * *
Other related posts:
