Wave profiler is only there when using MME drivers.It's not there when using asio drivers. Jean ----- Original Message ----- From: <fioresq1@xxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, April 23, 2006 5:19 PM Subject: [ddots-l] Re: waive profiler in sonar > the last button on the genral page is asio pannel and before that isbuffer > size, Alt+w does nothing. Thanks, are you using sonar 4? > ----- Original Message ----- > From: "Ilkster" <The_Ilkster@xxxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Sunday, April 23, 2006 4:58 PM > Subject: [ddots-l] Re: waive profiler in sonar > > > > On the general page of the audio options dialog, Wave Profiler is the last > > button before the OK button. Make sure you're on the general page of this > > multi-page dialog, and tab through until you land on wave profiler. By > the > > way, Alt+W is the hotkey for wave profiler. When in the general page, > just > > press alt+w and that will start wave profiler. > > > > > > ----- Original Message ----- > > From: <fioresq1@xxxxxxxxxxx> > > To: <ddots-l@xxxxxxxxxxxxx> > > Sent: Sunday, April 23, 2006 4:12 PM > > Subject: [ddots-l] waive profiler in sonar > > > > > > >I am using sonar 4 with caketalking. In reviewing the tutorial it > mentions > > > a waive profiler. Unfortunately, I can't seem to loacte it in the audio > > > options. Any help would be appreciated. John Fioravanti > > > ----- Original Message ----- > > > From: "Rod" <roddj12@xxxxxxxxxxx> > > > To: <ddots-l@xxxxxxxxxxxxx> > > > Sent: Sunday, April 23, 2006 4:10 PM > > > Subject: [ddots-l] Re: when should one record mono or stereo? > > > > > > > > >> thanks, phill. > > >> > > >> Rod > > >> ----- Original Message ----- > > >> From: "Phil Muir" <philmuir1@xxxxxxxxxxx> > > >> To: <ddots-l@xxxxxxxxxxxxx> > > >> Sent: Sunday, April 23, 2006 12:24 PM > > >> Subject: [ddots-l] Re: when should one record mono or stereo? > > >> > > >> > > >> > Hi Rod!! > > >> > > > >> > I always record items such as kick, snare, guitars, vocals and bass > > > guitar > > >> in mono. Having said > > >> > that, if I had a drum or, keyboard sound that was stereo then, I > would > > >> record 2 channels of it. In > > >> > other words, I would record it in stereo but, not using a stereo > track. > > >> This is because, recording > > >> > the sound as two mono tracks, gives me more control over it as I have > > > two > > >> panning controls and > > >> > therefore, can decide how much of the stereo spread the sound takes > up > > > in > > >> the mix. For example, if > > >> > I had a keyboard coming into my sound card then, I would choose the > two > > >> mono inputs from the desk > > >> > and sound card for that track. So, I would chose, MOTU 1 for the > left > > >> channel, and MOTU 2 for the > > >> > right channel, rather than choosing the stereo input. > > >> > > > >> > If the sound that I am using is a DXi instrument then, I leave it as > a > > >> stereo track. > > >> > > > >> > Regards, Phil Muir > > >> > > > >> > P J Muir Productions, Music and audio production, > > >> > Mixing, Mastering: www.philmuir.com/ > > >> > > > >> > ----- Original Message ----- > > >> > From: "Rod" <roddj12@xxxxxxxxxxx> > > >> > To: <ddots-l@xxxxxxxxxxxxx> > > >> > Sent: Sunday, April 23, 2006 8:07 AM > > >> > Subject: [ddots-l] when should one record mono or stereo? > > >> > > > >> > > > >> > > Can the pros chime in on this one, please? > > >> > > As some of you know, I am not a pro, but I have been fortunate to > mix > > >> some > > >> > > decent mixes, however, there is a lot of room for improvement. > > >> > > Here is my dilemma below: > > >> > > > > >> > > I have the tendency to record all of my tracts in stereo, and mix > > >> > > most > > >> of > > >> > > them this way. My question is this: when should I record a tract > > > stereo, > > >> or > > >> > > mono? I know that stereo sounds better, that's why I recorded as > > >> > > such: > > >> but > > >> > > is this a good practice? I sometimes end up converting my kick into > > >> mono, > > >> > > anyway. > > >> > > Yet, what are some tracts or instruments that you can say are > > > generally > > >> > > should be recorded > > >> > > as a mono signal? Drums, bass, etc? > > >> > > I always record live guitar as mono, and vocals also. > > >> > > I use the motif for tracking. > > >> > > > > >> > > Rod > > >> > > ** To leave the list, click on the immediately-following link:- > > >> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > >> > > ** If this link doesn't work then send a message to: > > >> > > ** ddots-l-request@xxxxxxxxxxxxx > > >> > > ** and in the Subject line type > > >> > > ** unsubscribe > > >> > > ** For other list commands such as vacation mode, click on the > > >> > > ** immediately-following link:- > > >> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > >> > > ** or send a message, to > > >> > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > >> > > > > >> > > > > >> > ** To leave the list, click on the immediately-following link:- > > >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > >> > ** If this link doesn't work then send a message to: > > >> > ** ddots-l-request@xxxxxxxxxxxxx > > >> > ** and in the Subject line type > > >> > ** unsubscribe > > >> > ** For other list commands such as vacation mode, click on the > > >> > ** immediately-following link:- > > >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > >> > ** or send a message, to > > >> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > >> > > > >> > > > >> ** To leave the list, click on the immediately-following link:- > > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > >> ** If this link doesn't work then send a message to: > > >> ** ddots-l-request@xxxxxxxxxxxxx > > >> ** and in the Subject line type > > >> ** unsubscribe > > >> ** For other list commands such as vacation mode, click on the > > >> ** immediately-following link:- > > >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > >> ** or send a message, to > > >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > >> > > > > > > ** To leave the list, click on the immediately-following link:- > > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > > ** If this link doesn't work then send a message to: > > > ** ddots-l-request@xxxxxxxxxxxxx > > > ** and in the Subject line type > > > ** unsubscribe > > > ** For other list commands such as vacation mode, click on the > > > ** immediately-following link:- > > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > > ** or send a message, to > > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > > > > > > > > > > > ** To leave the list, click on the immediately-following link:- > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > > ** If this link doesn't work then send a message to: > > ** ddots-l-request@xxxxxxxxxxxxx > > ** and in the Subject line type > > ** unsubscribe > > ** For other list commands such as vacation mode, click on the > > ** immediately-following link:- > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > > ** or send a message, to > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq