[ddots-l] Re: volume on soft synth midi track
- From: "Omar Binno" <omarbinno@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 22 Jan 2007 16:33:31 -0500
No, not a fader, but the actual volume of the entire midi track in the volume
column of the track.
Omar Binno
----- Original Message -----
From: Dan Rugman
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, January 22, 2007 4:09 PM
Subject: [ddots-l] Re: volume on soft synth midi track
Hi Omar,
to delete automation only, select the track and open the cut dialogue.
Uncheck everything except track automation and then press enter. I think that
box might not show up if there isn't any automation.
I don't know how a snapshot can have been taken if you didn't deliberately
take on. I suppose you could have armed the control and hit snapshot by
mistake but I'm just guessing really.
Just to confirm, are we talking about moving the fader with the value change
keys or with an external controller?
Dan
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, January 22, 2007 8:31 PM
Subject: [ddots-l] Re: volume on soft synth midi track
Hi Dan:
There weren't any controlers in the track. Also, could there be a snapshot
if I didn't do any automation? If so, how do I delete just the automation out
of the track?
Thanks.
Omar Binno
----- Original Message -----
From: Dan Rugman
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, January 22, 2007 1:45 PM
Subject: [ddots-l] Re: volume on soft synth midi track
There could be a controller message at the beginning of the track
interfering with the fader. Have a look in the event list.
Another possibility is that a snapshot, or some other kind of automation,
is locking it too. Try selecting the whole track and deleting only the track
automation.
Hope this helps,
Dan
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, January 22, 2007 4:16 PM
Subject: [ddots-l] volume on soft synth midi track
Hi:
I'm not able to change the volume on a midi track with a soft synth
inserted in it. I've assigned the midi channel, and everything seems to be
assigned to its proper destination, but the volume will not change.
Any ideas?
Thanks.
Omar Binno
Other related posts:
