Okay I just did some experimenting and here's what I discovered. If I insert hypersonic 2 as an effect onto an audio track, then assign a midi track to it that way, I can control its volume with no problems. However, I'm inserting the dr008, another soft synth, via the alt i menu, and that's when the volume function doesn't work. On 1/22/07, Dan Rugman <danrugman@xxxxxxxxxxx> wrote:
There could be a controller message at the beginning of the track interfering with the fader. Have a look in the event list. Another possibility is that a snapshot, or some other kind of automation, is locking it too. Try selecting the whole track and deleting only the track automation. Hope this helps, Dan ----- Original Message ----- From: Omar Binno To: ddots-l@xxxxxxxxxxxxx Sent: Monday, January 22, 2007 4:16 PM Subject: [ddots-l] volume on soft synth midi track Hi: I'm not able to change the volume on a midi track with a soft synth inserted in it. I've assigned the midi channel, and everything seems to be assigned to its proper destination, but the volume will not change. Any ideas? Thanks. Omar Binno
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq