[ddots-l] Re: volume on soft synth midi track
- From: "neville" <neville@xxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 22 Jan 2007 22:58:50 -0500
What is the DR008?
----- Original Message -----
From: Dan Rugman
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, January 22, 2007 5:14 PM
Subject: [ddots-l] Re: volume on soft synth midi track
You can do this with other softsynths?
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, January 22, 2007 9:33 PM
Subject: [ddots-l] Re: volume on soft synth midi track
No, not a fader, but the actual volume of the entire midi track in the
volume column of the track.
Omar Binno
----- Original Message -----
From: Dan Rugman
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, January 22, 2007 4:09 PM
Subject: [ddots-l] Re: volume on soft synth midi track
Hi Omar,
to delete automation only, select the track and open the cut dialogue.
Uncheck everything except track automation and then press enter. I think that
box might not show up if there isn't any automation.
I don't know how a snapshot can have been taken if you didn't
deliberately take on. I suppose you could have armed the control and hit
snapshot by mistake but I'm just guessing really.
Just to confirm, are we talking about moving the fader with the value
change keys or with an external controller?
Dan
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, January 22, 2007 8:31 PM
Subject: [ddots-l] Re: volume on soft synth midi track
Hi Dan:
There weren't any controlers in the track. Also, could there be a
snapshot if I didn't do any automation? If so, how do I delete just the
automation out of the track?
Thanks.
Omar Binno
----- Original Message -----
From: Dan Rugman
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, January 22, 2007 1:45 PM
Subject: [ddots-l] Re: volume on soft synth midi track
There could be a controller message at the beginning of the track
interfering with the fader. Have a look in the event list.
Another possibility is that a snapshot, or some other kind of
automation, is locking it too. Try selecting the whole track and deleting only
the track automation.
Hope this helps,
Dan
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, January 22, 2007 4:16 PM
Subject: [ddots-l] volume on soft synth midi track
Hi:
I'm not able to change the volume on a midi track with a soft synth
inserted in it. I've assigned the midi channel, and everything seems to be
assigned to its proper destination, but the volume will not change.
Any ideas?
Thanks.
Omar Binno
Other related posts:
