presumably if you had something that didn't work in 64 it very well may work in 32.
At 05:05 PM 2/15/2015, you wrote:
So what would be the benefits of going that route with the 32 bit for the plug-insManny, sent from my iPhone 5s > On Feb 15, 2015, at 1:13 PM, Chris Smart <csmart8@xxxxxxxxx> wrote: >> Actually, I only have 64 on this machine. but, i'm primarily mixing and mastering, not doing anything with software synths, and at least on the audio side, when I need to use an old 32-bit plug-in, it loads fine under the 64-bit version. If you have the space, just install both.> > At 01:50 PM 2/15/2015, you wrote:>> It sounds, to a great degree, like it would be better to install the 32-bit rather than the 64 from what people are telling me on this list.I assume that both the 32 and 64-bit are available on the same diskbecause I was never asked which one I wanted.I have already purchased them but now must wait for the disks and wait till Tuesday in order to have my credit card ran. So a little bit of a delay unfortunately>> >> Sent from my iPhone >> >> > On Feb 15, 2015, at 1:38 PM, Chris Smart <csmart8@xxxxxxxxx> wrote: >> >>> > yep, Dancing Dots can get you Sonar 8.53 32- and 64-bit both. you can install both if you like. They're probably the only people who can still get 8.5X.>> > >> > At 07:48 AM 2/12/2015, you wrote:>> >> Howdy Friends, After my xp bit the dust and not worth fixing, couple e-mails from Bill, and see now that I'm going to need to upgrade my caketalking version to 8.8 in order to run on windows 7 which is ok, but pretty sure my win 7 machine is a 64 bit computer so thinking that I may need to buy a new copy of sonar as well, since believe first version in 2009 that i have is a 32 bit. >> >> Does anyone know if the version i can currently buy from dancing dots is most current with caketalking 8.8, as hoping to avoid some of the updating and stuff needed to do previously in order to bring sonar 8.0 up to 8.53? Hoping there is a sonar 8.53 64 bit so I will be set. >> >> As it is, one crash of my xp machine is going to be possibly expensive and a major hastle configuring caketalking so hoping to find the path of least resistance. at least I already had the win 7 machine or would have just tried to get a "like new" win xp computer. the old caketalking 8.0 worked plenty good for me and was just perfect til the crash, so hoping to get back to that and after only a few days, really missing my recording setup. >> >> obviously, at this point will do whatever is required, but looking for least expensive and least hastle as i can since not a computer literate person.... >> >> In closing, cant thank those on this list enough for all your help, including Bill and DJX. Hoping to purchase whatever updates necessary today but webpage a little confusing and will probably call office first. >> >> As it is, turns out caketalking 8.8 is able to work with jaws 15 and not even on their web page, so not taking any chances of buying anything else til I am sure it will work together. at least believe my focusrite scarlet 2 should work on windows 7. Sincerely, Dave>> > >> > PLEASE READ THIS FOOTER AT LEAST ONCE! >> > To leave the list, click on the immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >> > If this link doesn't work then send a message to: >> > ddots-l-request@xxxxxxxxxxxxx >> > and in the Subject line type >> > unsubscribe>> > For other list commands such as vacation mode, click on the immediately following link:>> > ddots-l-request@xxxxxxxxxxxxx?subject=faq or >> > send a message, to ddots-l-request@xxxxxxxxxxxxx >> > and in the Subject line type >> > faq >> > >> PLEASE READ THIS FOOTER AT LEAST ONCE! >> To leave the list, click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe >> If this link doesn't work then send a message to: >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> unsubscribe >> For other list commands such as vacation mode, >> click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subjectúq or >> send a message, to >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe> For other list commands such as vacation mode, click on the immediately following link:> ddots-l-request@xxxxxxxxxxxxx?subject=faq or > send a message, to ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > faq > PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
