So what would be the benefits of going that route with the 32 bit for the plug-ins Manny, sent from my iPhone 5s > On Feb 15, 2015, at 1:13 PM, Chris Smart <csmart8@xxxxxxxxx> wrote: > > Actually, I only have 64 on this machine. but, i'm primarily mixing and > mastering, not doing anything with software synths, and at least on the audio > side, when I need to use an old 32-bit plug-in, it loads fine under the > 64-bit version. If you have the space, just install both. > > At 01:50 PM 2/15/2015, you wrote: >> It sounds, to a great degree, like it would be better to install the 32-bit >> rather than the 64 from what people are telling me on this list.I assume >> that both the 32 and 64-bit are available on the same diskbecause I was >> never asked which one I wanted.I have already purchased them but now must >> wait for the disks and wait till Tuesday in order to have my credit card >> ran. So a little bit of a delay unfortunately >> >> Sent from my iPhone >> >> > On Feb 15, 2015, at 1:38 PM, Chris Smart <csmart8@xxxxxxxxx> wrote: >> > >> > yep, Dancing Dots can get you Sonar 8.53 32- and 64-bit both. you can >> > install both if you like. They're probably the only people who can still >> > get 8.5X. >> > >> > At 07:48 AM 2/12/2015, you wrote: >> >> Howdy Friends, After my xp bit the dust and not worth fixing, couple >> >> e-mails from Bill, and see now that I'm going to need to upgrade my >> >> caketalking version to 8.8 in order to run on windows 7 which is ok, but >> >> pretty sure my win 7 machine is a 64 bit computer so thinking that I may >> >> need to buy a new copy of sonar as well, since believe first version in >> >> 2009 that i have is a 32 bit. >> >> Does anyone know if the version i can currently buy from dancing dots >> >> is most current with caketalking 8.8, as hoping to avoid some of the >> >> updating and stuff needed to do previously in order to bring sonar 8.0 up >> >> to 8.53? Hoping there is a sonar 8.53 64 bit so I will be set. >> >> As it is, one crash of my xp machine is going to be possibly expensive >> >> and a major hastle configuring caketalking so hoping to find the path of >> >> least resistance. at least I already had the win 7 machine or would have >> >> just tried to get a "like new" win xp computer. the old caketalking 8.0 >> >> worked plenty good for me and was just perfect til the crash, so hoping >> >> to get back to that and after only a few days, really missing my >> >> recording setup. >> >> obviously, at this point will do whatever is required, but looking for >> >> least expensive and least hastle as i can since not a computer literate >> >> person.... >> >> In closing, cant thank those on this list enough for all your help, >> >> including Bill and DJX. Hoping to purchase whatever updates necessary >> >> today but webpage a little confusing and will probably call office first. >> >> As it is, turns out caketalking 8.8 is able to work with jaws 15 and not >> >> even on their web page, so not taking any chances of buying anything else >> >> til I am sure it will work together. at least believe my focusrite >> >> scarlet 2 should work on windows 7. Sincerely, Dave >> > >> > PLEASE READ THIS FOOTER AT LEAST ONCE! >> > To leave the list, click on the immediately following link: >> > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >> > If this link doesn't work then send a message to: >> > ddots-l-request@xxxxxxxxxxxxx >> > and in the Subject line type >> > unsubscribe >> > For other list commands such as vacation mode, click on the immediately >> > following link: >> > ddots-l-request@xxxxxxxxxxxxx?subject=faq or >> > send a message, to ddots-l-request@xxxxxxxxxxxxx >> > and in the Subject line type >> > faq >> > >> PLEASE READ THIS FOOTER AT LEAST ONCE! >> To leave the list, click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe >> If this link doesn't work then send a message to: >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> unsubscribe >> For other list commands such as vacation mode, >> click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subjectúq or >> send a message, to >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, click on the immediately > following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or > send a message, to ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > faq > PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject�q or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq