[ddots-l] Re: firepod latency and performance

  • From: Mike C <m_dsmusic@xxxxxxxxxxxx>
  • To: ddots-l@xxxxxxxxxxxxx
  • Date: Fri, 23 Nov 2007 22:32:03 -0500

Hi stacy I am indeed available this sunday, lets say sometime in the evening. 

I can certainly give you my number, and we could touch base.
I'd love to give you a call but I accidentally left my skype info at work, an don't remember the right info to get in. 
At any rate, I also don't mind giveing you a call as well.  Let me know.
----- Original Message ----- From: "Stacy Bleeks" <sbleeks@xxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, November 21, 2007 11:39 PM
Subject: [ddots-l] Re: firepod latency and performance



Hi Mike.
Thanks very much for the offer. I will take you up on it. for now, I've been able to change the mms settings in the Firepod control panel up to 6 and then to 12, restarted but unfortunatley I still have the same results of audio stuttering. These audio cracks and pops etc. occur in the project where there is a lott going on as in audio and effects etc. 

Are you available this Sunday at some point?

Thanks
Stacy
----- Original Message ----- From: "Mike C" <m_dsmusic@xxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, November 21, 2007 6:33 AM
Subject: [ddots-l] Re: firepod latency and performance
Hi there stacy why don't you give me a call and I will definatly help you troubleshoot your firepod. In fact I have had no problems in getting the jaws cursor to navigate the Presonus control panel. -Or if you don't mind, I'll give you a call since I have unlimited account to long distance to skype. ---- Original Message ----- From: "Phil Muir" <ddots@xxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, November 21, 2007 3:43 AM
Subject: [ddots-l] Re: firepod latency and performance
Stacy wrote: I recall that the current driver is set at 3.1 mms but don't know what that 
means.
Phil replied: it means that your latency slider is probably set too low. Try moving the driver setting to 5.8MS. 


Regards, Phil Muir
P J Muir Productions
Music And Audio Production
URL:
www.philmuir.com/
Band website:
www.steelstringmusic.co.uk/
Band my Space Site:
www.myspace.com/steelstringmusic
----- Original Message ----- From: "Stacy Bleeks" <sbleeks@xxxxxxxxxxxx> 
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, November 20, 2007 11:46 PM
Subject: [ddots-l] firepod latency and performance



Hi Phil and all,
I am using the Presonus Firepod. Even with the JAWS cursor the Firepod is completely innaccessible. I know that I've using 44/100 with number of buffers set at 4 (16 is makximum and setting more than 7 results in audio trouble) buffer size is set at 80 to 100% This needs to be set at 12 to 20% for reasonable midi reaction using soft synths.
I have no access to latency settings using either the JAWS or invisible cursors let alone the PC or virtual cursor.
Everything seems to run pretty smoothly until I reach upwards of 24 tracks. Word around the campfire is that with my system I should be getting way better performance than this.
I'll get somebody with a good pair of eyes over here aand see if we can't find the "latency" settings.
I recall that the current driver is sett at 3.1 mms but don't know what that means. 

Many thanks,
and
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq 




** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq 



** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq 

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq 



** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts:

  1. Home
  2. ddots-l
  3. Archive
  4. 11-2007