[ddots-l] Re: firepod latency and performance

Stacy wrote: I recall that the current driver is set at 3.1 mms but don't know 
what that
means.

Phil replied: it means that your latency slider is probably set too low.  Try 
moving the driver 
setting to 5.8MS.


Regards, Phil Muir
P J Muir Productions
Music And Audio Production
URL:
www.philmuir.com/
Band website:
www.steelstringmusic.co.uk/
Band my Space Site:
www.myspace.com/steelstringmusic
----- Original Message ----- 
From: "Stacy Bleeks" <sbleeks@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, November 20, 2007 11:46 PM
Subject: [ddots-l] firepod latency and performance


> Hi Phil and all,
>
> I am using the Presonus Firepod.  Even with the JAWS cursor the Firepod is 
> completely 
> innaccessible.  I know that I've using 44/100 with number of buffers set at 4 
> (16 is makximum and 
> setting more than 7 results in audio trouble) buffer size is set at 80 to 
> 100%  This needs to be 
> set at 12 to 20% for reasonable midi reaction using soft synths.
>
> I have no access to latency settings using either the JAWS or invisible 
> cursors let alone the PC 
> or virtual cursor.
>
> Everything seems to run pretty smoothly until I reach upwards of 24 tracks. 
> Word around the 
> campfire is that with my system I should be getting way better performance 
> than this.
>
> I'll get somebody with a good pair of eyes over here aand see if we can't 
> find the "latency" 
> settings.
>
> I recall that the current driver is sett at 3.1 mms but don't know what that 
> means.
>
> Many thanks,
> and
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- 
> faq
> 


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: