He's running your good friend, jaws 14... remember? lol D!J!X! -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Jack Conti Sent: Wednesday, February 18, 2015 4:45 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Serious Problem With Jaws. curious what version of jaws is he running, i have seen this. At 04:37 PM 2/18/2015, you wrote: >Hey Josh, > >Have you changed any hardware on your machine lately? Sometimes this >will cause this problem to come up. Other than that, I can't think of >anything else off hand that would give you a problem. It's quite >possible that there might be something stupid going on with the ILM >scheme. I Know that they've changed it quite a bit in JAWS 16. >Believe it or not, I'm still using 12; fortunately I haven't had a >problem with it except for when I installed a new hard drive. I had to >reauthorize it because of the existence of new hardware. > >Hope this helps; but if it persists, I'd be on the horn to Freedom >Scientific - like yesterday - because it's not right. > > > >Mike > > > >----- Original Message ----- From: "Josh Stundon" ><joshstundon@xxxxxxxxx> >To: <ddots-l@xxxxxxxxxxxxx> >Sent: Wednesday, February 18, 2015 15:34 >Subject: [ddots-l] Serious Problem With Jaws. > > >Hello all. >It's been a while since I posted on here, but I've had some very >strange problems with jaws recently. I use sonar 8.5 with cake talking >8.8 installed on a 64 bit machine. Ever since I got it in April of last >year, I have not had any problems, until Monday. When I started up the >computer on Monday, jaws asked me for the authorization code that came >with the jaws cd, and it had never asked for that before until now. It >said it was in demmo mode so I entered in the authorization code and >everything seemed fine again. >I wasn't on my computer yesterday so I couldn't check and see if the >problem was sufficiently resolved or not, but I'm just after checking >it again a while ago, and again when I started the computer, jaws told >me that it was operating in 40 minute mode, even though I had activated >it the other day using the authorization code that came with the jaws >cd. This is very frustrating as I have never come across this problem >in the last 10 months since I have been using sonar, cake talking and >jaws. So now, I cannot use sonar and cake talking until I get this >resolved. I guess I will have to keep reactivating jaws for the moment. >Has anyone come across this before ? This may not be the right place >for posting this information, but any help with this matter would be >much appreciated. > >If all comes to all I can try get in contact with freedom scientific, >but I am quite concerned about this since it has never happened before. > >Kind regards, >Josh >PLEASE READ THIS FOOTER AT LEAST ONCE! >To leave the list, click on the immediately following link: >ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >If this link doesn't work then send a message to: >ddots-l-request@xxxxxxxxxxxxx >and in the Subject line type >unsubscribe >For other list commands such as vacation mode, click on the immediately >following link: >ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to >ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq