Hey Sean! Please can you tell me what the"Octtipre" is? I've never heard of it... Cheers Mike ----- Original Message ----- From: "Sean A. Cummins" <seanacummins@xxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, March 23, 2008 1:53 PM Subject: [ddots-l] Re: Glitches and pops? > Herman, > > Don't forget to check your clock source under the FW+1884 control panel. > If your using the Octtipre,, you need to set it to "ADAT". Otherwise, you > need to set it to "internal". Then, always do your audio profiling and > reboot Sonar. > > Sean > > > > > ----- Original Message ----- > From: "HF" <hermanfermin@xxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Sunday, March 23, 2008 6:20 AM > Subject: [ddots-l] Re: Glitches and pops? > > >> What other settings did you have to change or tweak? I'm having the same >> problem here and I also have the Tascam 1884. After switching to WDM >> still getting pops albeit a whole lot less.. >> >> HF >> ----- Original Message ----- >> From: "Mike Christer" <m-christer@xxxxxxxxxxxxx> >> To: <ddots-l@xxxxxxxxxxxxx> >> Sent: Saturday, March 22, 2008 6:48 AM >> Subject: [ddots-l] Re: Glitches and pops? >> >> >>> Hey Gord! >>> >>> Thanx for the feedback, I've made a record of your advice. >>> As luck would have it, I spoke to Phil Muir, and he helped me out by >>> basically changing the ASIO drivers to the WDM ones, and everything is >>> now hunky dory! >>> >>> Laters >>> >>> Mike >>> ----- Original Message ----- >>> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx> >>> To: <ddots-l@xxxxxxxxxxxxx> >>> Sent: Saturday, March 22, 2008 5:24 AM >>> Subject: [ddots-l] Re: Glitches and pops? >>> >>> >>>> Mike: >>>> Have you done some of the basic tweaks for best audio performance? >>>> Have you set priority to background services in the performance dialog >>>> under the advanced tab of system in windows control pannel? Have you >>>> set your paging file size to be constant, the same for minimum and >>>> maximum, which should be 1.5 times your amount of ram? HOw much ram do >>>> you have? What do you have the latency set at for you Tascam? There >>>> are many reasons you could be having this difficulty. Is the clock >>>> source of the tasam set appropriately? I'm sorry to dump all this on >>>> you, but any one of these factors can contribute to poor audio >>>> performance. >>>> Gord >>>> ----- Original Message ----- >>>> From: "Mike Christer" <m-christer@xxxxxxxxxxxxx> >>>> To: <ddots-l@xxxxxxxxxxxxx> >>>> Sent: Wednesday, March 19, 2008 8:57 PM >>>> Subject: [ddots-l] Re: Glitches and pops? >>>> >>>> >>>>> Hey Gord! >>>>> >>>>> I'm using a Tascam FW1884 as my primary soundcard with the asio >>>>> drivers, and I do have a separate hard drive for audio... >>>>> >>>>> Mike >>>>> ----- Original Message ----- >>>>> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx> >>>>> To: <ddots-l@xxxxxxxxxxxxx> >>>>> Sent: Wednesday, March 19, 2008 11:13 PM >>>>> Subject: [ddots-l] Re: Glitches and pops? >>>>> >>>>> >>>>>> What sound card are you using for Sonar? Are you using asio or wdm >>>>>> drivers? Do you have a separate hard ddrive for audio? >>>>>> GOrd >>>>>> ----- Original Message ----- >>>>>> From: "pop.tiscali.co.uk" <m-christer@xxxxxxxxxxxxx> >>>>>> To: <ddots-l@xxxxxxxxxxxxx> >>>>>> Sent: Wednesday, March 19, 2008 6:20 PM >>>>>> Subject: [ddots-l] Glitches and pops? >>>>>> >>>>>> >>>>>>> Hey DD peeps! >>>>>>> >>>>>>> I'm getting little pops and crackles coming out of my monitors, but >>>>>>> I'm only playing back 1 track of audio, and I'm playing along. >>>>>>> >>>>>>> I have a project open with 4 audio trax with 1 plug-in inserted on >>>>>>> each channel. >>>>>>> >>>>>>> I went to the Cakewalk website and found out about the AUD.INI file, >>>>>>> which I could alter in order to solve my problem. >>>>>>> >>>>>>> However, I can't find the AUD.INI file on my system? >>>>>>> >>>>>>> Please can you help, this is driving me crazy, my buffers are >>>>>>> currently set to 256kHz. >>>>>>> >>>>>>> I realise that this should only happen with a project with numerous >>>>>>> audio trax happening, so I'm very confused! >>>>>>> >>>>>>> I'm running a Carillon dual core pentium 4 system, with 2Gb of RAM, >>>>>>> and 650 Gb of hard disc space. >>>>>>> >>>>>>> I'm also running Sonar 6 Pro, with the latest version of Cake >>>>>>> Talking. >>>>>>> >>>>>>> Please can you help? >>>>>>> >>>>>>> Thanx >>>>>>> >>>>>>> Best regards >>>>>>> >>>>>>> Mike Christer >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> PLEASE READ THIS FOOTER AT LEAST ONCE! >>>>>>> To leave the list, click on the immediately following link: >>>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>>>>> If this link doesn't work then send a message to: >>>>>>> ddots-l-request@xxxxxxxxxxxxx >>>>>>> and in the Subject line type >>>>>>> unsubscribe >>>>>>> For other list commands such as vacation mode, click on the >>>>>>> immediately following link: >>>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>>>>> send a message, to ddots-l-request@xxxxxxxxxxxxx >>>>>>> and in the Subject line type >>>>>>> faq >>>>>>> >>>>>>> >>>>>> >>>>>> PLEASE READ THIS FOOTER AT LEAST ONCE! >>>>>> To leave the list, click on the immediately following link: >>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>>>> If this link doesn't work then send a message to: >>>>>> ddots-l-request@xxxxxxxxxxxxx >>>>>> and in the Subject line type >>>>>> unsubscribe >>>>>> For other list commands such as vacation mode, click on the >>>>>> immediately following link: >>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>>>> send a message, to ddots-l-request@xxxxxxxxxxxxx >>>>>> and in the Subject line type >>>>>> faq >>>>>> >>>>> >>>>> >>>>> PLEASE READ THIS FOOTER AT LEAST ONCE! >>>>> To leave the list, click on the immediately following link: >>>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>>> If this link doesn't work then send a message to: >>>>> ddots-l-request@xxxxxxxxxxxxx >>>>> and in the Subject line type >>>>> unsubscribe >>>>> For other list commands such as vacation mode, click on the >>>>> immediately following link: >>>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>>> send a message, to ddots-l-request@xxxxxxxxxxxxx >>>>> and in the Subject line type >>>>> faq >>>>> >>>>> >>>> >>>> PLEASE READ THIS FOOTER AT LEAST ONCE! >>>> To leave the list, click on the immediately following link: >>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>> If this link doesn't work then send a message to: >>>> ddots-l-request@xxxxxxxxxxxxx >>>> and in the Subject line type >>>> unsubscribe >>>> For other list commands such as vacation mode, click on the immediately >>>> following link: >>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>> send a message, to ddots-l-request@xxxxxxxxxxxxx >>>> and in the Subject line type >>>> faq >>>> >>> >>> >>> PLEASE READ THIS FOOTER AT LEAST ONCE! >>> To leave the list, click on the immediately following link: >>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>> If this link doesn't work then send a message to: >>> ddots-l-request@xxxxxxxxxxxxx >>> and in the Subject line type >>> unsubscribe >>> For other list commands such as vacation mode, click on the immediately >>> following link: >>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>> send a message, to ddots-l-request@xxxxxxxxxxxxx >>> and in the Subject line type >>> faq >>> >> >> PLEASE READ THIS FOOTER AT LEAST ONCE! >> To leave the list, click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >> If this link doesn't work then send a message to: >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> unsubscribe >> For other list commands such as vacation mode, click on the immediately >> following link: >> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >> send a message, to ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> faq >> > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, click on the immediately > following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or > send a message, to ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > faq > PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq