In message <6a75bc8e4f.dougjwebb@xxxxxxxxxxxxxxx> Doug Webb <doug.j.webb@xxxxxxxxxxxxxx> wrote: >>> Have a look at the settings file in side CDBurn and see if the scan is >>> set to yes. >>> >>> You should see something like this at the end of the file >>> >>> scanAcorn=no >>> scanSimtec=yes >>> scanAPDL=yes >>> scanSCSI=yes >>> scanCDFS=yes >>> scanRapIDE=yes >>> scanIyonix=yes >>> >> The scanAcorn is set to "yes". Is this significant? > >> Andrew > > Andrew, > > Not sure but try setting it to NO as your using the Unipod and as you > don't have an Iyonix set that to NO as well. You can always set them > back to what they were. > Having tried it again under RO6.06, I loaded CDBurn about 4 times without changing the settings and it eventually recognised the ATAPI interface. It worked the first time under RO4.39. Andrew --