On 4/14/08, Steffen Huber <steffen@xxxxxxxxxxxx> wrote: > > For some reason CDBurn is not abel to recognise CDFSSoftATAPI from the > > Unipod inside my RiscPC. I try re-scan but still nothing appears in > > configuration despite the CDFS menu showing "ATAPI". Using RISC 6.06 > > with !ATAPIfix. > > I am not sure if I understand correctly what the problem is. > > Do you have your writer connected to your UniPod and CDBurn fails > to detect it? I seem to remember a similar error reported a few years > ago, but it was only one user, and he solved the problem by connecting > the writer to the internal IDE. > I think both are connected to the Unipod but it's worked before I'm sure. > I was never able to reproduce the problem with my RPC and the > Simtec IDE podule, which should be identical to the IDE part of > the UniPod. > > You are using at least CDBurn V1.61, yes? Could you set the log level to > 5000 and send me the resulting log of a CDBurn startup and a Rescan? > Yes (if I can find out how to do it) and I'll try adjusting the configuration as Doug suggested as soon as possible. Andrew