if you are just burning do not take the time bark burns good. the tool used for debarking logs is a slick it looks like a huge chizzle with a handel that is 3 foot long or so. the blade is about 4 inches wide and 8 to ten long. the bevel is very long at a light slope and tool head is around 3/8 inches thick lots of waight so wen you push it under bark the waight gives you a little anersha as for black walnut I wont all the notty ones to turn and for what they say about fire wood it "heates you several times:once wen cut once wen split and one more time wen you carey and stack and every one wen you burn it." Cordially, George M. Wurtzel www.gmwurtzel.com "Success is not final, failure is not fatal: it is the courage to continue that counts." Winston Churchill > On Nov 9, 2013, at 5:49 AM, "Jim King" <jim@xxxxxxxxxxxxxxxxx> wrote: > > Hello, > A draw knife works well for removing bark when the bark is not too thick. A > draw knife is a heavy blade around a foot long with a handle at each end. The > handles are perpendicular to the blade, forming a U shape. To use the draw > knife, work in the same direction as the length of the log and pull the knife > toward yourself. > Jim King > > From: blindwoodworker-bounce@xxxxxxxxxxxxx > [mailto:blindwoodworker-bounce@xxxxxxxxxxxxx] On Behalf Of John Sherrer > Sent: Saturday, November 09, 2013 1:35 AM > To: blindwoodworker@xxxxxxxxxxxxx > Subject: [blindwoodworker] Removing Bark > > Hi Woodworkers; > I need a good idea for removing bark from some pine logs. I have some black > walnut cut for fire wood that I also need to remove bark. > Any good ideas? > John Sherrer > > Check out my novel at: http://americastribulation.com >