[blindwoodworker] Re: Drying Logs
- From: "John Sherrer" <john@xxxxxxxxxxxxx>
- To: <blindwoodworker@xxxxxxxxxxxxx>
- Date: Sun, 10 Nov 2013 20:30:38 -0500
Met my wife their. We went back for our 35th anniversary in January. Ice
sheets stack up as they fall off the falls, nice in all seasons.
John
Check out my novel at: http://americastribulation.com
From: blindwoodworker-bounce@xxxxxxxxxxxxx
[mailto:blindwoodworker-bounce@xxxxxxxxxxxxx] On Behalf Of Bob Kennedy
Sent: Sunday, November 10, 2013 1:14 PM
To: blindwoodworker@xxxxxxxxxxxxx
Subject: [blindwoodworker] Re: Drying Logs
I actually lived in Niagara county, about 20 miles from Niagara Falls. I
still say "It's a good place to be from." I recognized a lot of the area
names in the article. There is a confusing group of communities on I
believe it's the Northeast side of Buffalo. There is the Town of Tonawanda
The City of Tonawanda and then North Tonawanda. At one time, the town was
the largest "town" in the country.
When I lived there, you could drive into Canada for a whole 40 cents and all
they did was ask where you were borne. Now you need a passport to cross the
bridge. And yes, the Canadian side of the falls is much more beautiful.
Not to mention cleaner...
Sorry to the rest for the unrelated reply to woodworking. But it started
with Anchorseal which is related.
----- Original Message -----
From: George Newberry <mailto:george.newberry@xxxxxxxxxxx>
To: blindwoodworker@xxxxxxxxxxxxx
Sent: Sunday, November 10, 2013 11:38 AM
Subject: [blindwoodworker] Re: Drying Logs
Bob:
That is very interesting. For a bit of history of the town you love to be
rid of read the following article.
http://en.wikipedia.org/wiki/History_of_Buffalo,_New_York
George
From: blindwoodworker-bounce@xxxxxxxxxxxxx
[mailto:blindwoodworker-bounce@xxxxxxxxxxxxx] On Behalf Of Bob Kennedy
Sent: Saturday, November 09, 2013 6:38 PM
To: blindwoodworker@xxxxxxxxxxxxx
Subject: [blindwoodworker] Re: Drying Logs
George, know where Anchorseal is made?
Buffalo New York. Know where Buffalo wings were invented? The Anchor Bar,
also in Buffalo. I lived there and still don't know what the deal is with
Anchors...
----- Original Message -----
From: George Newberry <mailto:george.newberry@xxxxxxxxxxx>
To: blindwoodworker@xxxxxxxxxxxxx
Sent: Saturday, November 09, 2013 9:32 PM
Subject: [blindwoodworker] Re: Drying Logs
Use Anchor Seal to slow down drying and keep the ends from splitting. This
is waxy paint like stuff. Easy to apply.
George
From: blindwoodworker-bounce@xxxxxxxxxxxxx
[mailto:blindwoodworker-bounce@xxxxxxxxxxxxx] On Behalf Of John Sherrer
Sent: Saturday, November 09, 2013 6:11 PM
To: blindwoodworker@xxxxxxxxxxxxx
Subject: [blindwoodworker] Drying Logs
One more question.
I want to put something on the ends of the pine logs that will not stop
moisture transfer. Something like paint will stop the moisture. I thought
about putting paper bags on each end, that works with turning projects.
John Sherrer
Check out my novel at: http://americastribulation.com
Other related posts:
