In article <51d85a44f6riscos@xxxxxxxxxxxxx>, Richard Ashbery <riscos@xxxxxxxxxxxxx> wrote: > In article <27affdd751.martin@xxxxxxxxxxxxxxxxxxx>, Martin Wuerthner > <lists@xxxxxxxxxxxxxxx> wrote: > > In message <2221fdd751.martin@xxxxxxxxxxxxxxxxxxx> Martin Wuerthner > > <lists@xxxxxxxxxxxxxxx> wrote: > [snip] > > Actually, not a !Printers bug but a UniPrint bug since the path is > > set up correctly for other drivers after loading !Printers. > > Basically, when you load !Printers and UniPrint is your default > > printer, then the essential "Printer$Path" variable contains > > "null:" instead of the correct UniPrint path. It works for other > > drivers, so this must be a UniPrint-specific problem. > So it does! Quite clearly seen by doing a Shift-right-click over the > Printers (UniPrint icon). "null:" can be seen in the writable box beside > the File radio icon after doing a re-boot. The correct path is shown > after clicking UniPrint's iconbar icon. > > So, you either need to take this up with R-Comp or get used to > > first clicking on the UniPrint icon once before trying to print. [Snip] > Clicking the UniPrint icon sets the path correctly and is a good > workaround. Thanks Martin for pointing this out. Running PrintSpool with 'Extended printer matching' set may also correct this problem. I don't have UniPrint so cannot test this. Ian -- Ian Hamilton (Iyonix RO5) http://www.hamiltoni.pwp.blueyonder.co.uk/ ------------------------------------------------------------ To change, suspend or cancel your subscription go to //www.freelists.org/list/artworks ------------------------------------------------------------