In article <27affdd751.martin@xxxxxxxxxxxxxxxxxxx>, Martin Wuerthner <lists@xxxxxxxxxxxxxxx> wrote: > In message <2221fdd751.martin@xxxxxxxxxxxxxxxxxxx> Martin Wuerthner > <lists@xxxxxxxxxxxxxxx> wrote: [snip] > Actually, not a !Printers bug but a UniPrint bug since the path is > set up correctly for other drivers after loading !Printers. > Basically, when you load !Printers and UniPrint is your default > printer, then the essential "Printer$Path" variable contains > "null:" instead of the correct UniPrint path. It works for other > drivers, so this must be a UniPrint-specific problem. So it does! Quite clearly seen by doing a Shift-right-click over the Printers (UniPrint icon). "null:" can be seen in the writable box beside the File radio icon after doing a re-boot. The correct path is shown after clicking UniPrint's iconbar icon. > So, you either need to take this up with R-Comp or get used to > first clicking on the UniPrint icon once before trying to print. > If you forget, nothing bad happens, you will see the error, then > all you have to do is click on the icon and then printing works > when you try again. Clicking the UniPrint icon sets the path correctly and is a good workaround. Thanks Martin for pointing this out. Regards Richard ------------------------------------------------------------ To change, suspend or cancel your subscription go to //www.freelists.org/list/artworks ------------------------------------------------------------