In message <561911bdedjcgl@xxxxxxxxxxxxxxx>
Jim Lesurf <jcgl@xxxxxxxxxxxxxxx> wrote:
In article <5619113bbealan.dawes@xxxxxxxxxx>, Alan P Dawes
<alan.dawes@xxxxxxxxxx> wrote:
In article <5618aaef8fjcgl@xxxxxxxxxxxxxxx>, Jim Lesurf
<jcgl@xxxxxxxxxxxxxxx> wrote:
However I get a problem when I want to change from using the Linux
machine to the ARMX6. I shut down the Linux machine, then switch the
HDMI to connect the ARMX6, then turn on the power to the ARMX6. It
then boots up as normal *except* that I get an error once the desktop
has appeared. This is in a system error box with "Error" in its window
title bar and the text.
What happens if you turn off the power to the HDMI switch after turning
off the Linux machine, wait a couple of minutes, turn on the power to
the switch and then the ARMX6?
The switch gets turned off with everthing else during most of the
switchovers I described. In essence *everything* has to be switched off at
the wall for some minutes before I can get the ARMX6 to not show the
problem.
Jim
