[argyllcms] DTP41 and Linux
- From: "Alastair M. Robinson" <blackfive@xxxxxxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Fri, 23 Jun 2006 00:32:26 +0100
Hi,
I've just bought a DTP41 off EBay - looks like a sound investment - but
I'm having trouble using it with Linux.
Printread gets as far as setting up the instrument, the strip goes
through, and then this happens:
serio: Write_Read called with '0405TS^M'
About to write '0405TS^M'
serio: Write returning with 0x0
serio: Read called
serio: About to return read ' 67.99^I 68.37^I 51.84^M 10.96^I
21.67^I 9.71^M 12.35^I 10.60^I 26.59^M 10.38^I 13.23^I 29.91^M
11.90^I 16.59^I 18.45^M 74.69^I 79.09^I 50.08^M 82.41^I 85.91^I
74.51^M 27.41^I 37.78^I 4.21^M 13.59^I 17.47^I 47.50^M 64.85^I
70.91^I 62.41^M 16.24^I 9.99^I 18.83^M 30.48^I 27.40^I 6.66^M
1.78^I 2.51^I 1.28^M 4.49^I 7.48^I 2.74^M 32.62^I 43.64^I
42.85^M 38.68^I 27.38^I 25.73^M 15.33^I 27.46^I 20.63^M 2.81^I
5.62^I 7.20^M 20.58^I 10.89^I 2.70^M 23.79^I 32.95^I 52.97^M
47.39^I 33.07^I 24.22^M 10.34^I 14.39^I 45.15^M 23.66^I 12.03^I
15.25^M 3.85^I 10.31^I 8.39^M 30.15^I 23.32^I 2.51^M<00>'
lerr 0x0
serio: Read returning with 0x0
serio: Write_Read Write_Read success, returning ' 67.99^I 68.37^I
51.84^M 10.96^I 21.67^I 9.71^M 12.35^I 10.60^I 26.59^M 10.38^I
13.23^I 29.91^M 11.90^I 16.59^I 18.45^M 74.69^I 79.09^I 50.08^M
82.41^I 85.91^I 74.51^M 27.41^I 37.78^I 4.21^M 13.59^I 17.47^I
47.50^M 64.85^I 70.91^I 62.41^M 16.24^I 9.99^I 18.83^M 30.48^I
27.40^I 6.66^M 1.78^I 2.51^I 1.28^M 4.49^I 7.48^I 2.74^M
32.62^I 43.64^I 42.85^M 38.68^I 27.38^I 25.73^M 15.33^I 27.46^I
20.63^M 2.81^I 5.62^I 7.20^M 20.58^I 10.89^I 2.70^M 23.79^I
32.95^I 52.97^M 47.39^I 33.07^I 24.22^M 10.34^I 14.39^I 45.15^M
23.66^I 12.03^I 15.25^M 3.85^I 10.31^I 8.39^M 30.15^I 23.32^I
2.51^M<00>'
serio: Write_Read called with '0403TS^M'
About to write '0403TS^M'
serio: Write returning with 0x0
serio: Read called
serio: About to return read ' ' lerr 0x80
serio: Read returning with 0x80
serio: Write_Read Write failed - returning 0x80
In other words it's successfully fetching XYZ data, but timing out when
asked to fetch the spectral values.
This happens both with the Linux X86 binaries and binaries self-built
from the autotools source, on two different machines.
If I run Win2000 under VMWare, and issue the self-same command line to
the Windows binaries, everything seems to be OK.
Any ideas?
All the best,
--
Alastair M. Robinson
Other related posts:
