[amayausers.com] Re: DSPro+9 and Monitor Question
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Wed, 11 Feb 2009 18:56:56 UT
This message was posted by Marcelle on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/3/291/3.html#000031
Ed and John,
Thank you, thank you. Found it. I wish I had known about that before. That
certainly answers that question. Looks like I may be the only person on the
list that did not know about that mouse speed adjustment in control panel. As
always, I appreciate all help. I am determined to learn this new software and
want to be sure that I make the correct purchase in computer hardware so that
it will work it's best.
I loaded DS on my Amaya computer last night to check on the speed for
digitizing. I purchased that computer just less than 2 years ago just for the
Amaya and use it for nothing else. It is much faster than my Dell XPS that is
5 years old but I do have some questions there.
I found that when I do a change to density (for instance) to say, 20 very small
satin stitch elements, it seems like it takes a long time for the change to be
made. With DS7 on that computer it happened instantly. Now my question. For
my computer is this how the DS9 software works? Is it a RAM issue? Is it a
processor speed issue? Is it a software issue (XP Professional vs Vista)?
Amaya computer is:
Intel core 2 Duo Processor 1.86 GHz, 1066FSB 4MB cache
2 BG DDR2 SDRAM at 667 MHz
XP Professional
The above computer was plenty fast for DS7 but not for DS9. Any advice
welcomed.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
