[windows2000] Re: OT-Configuring Dual Monitors
- From: "Amer Karim" <amerk@xxxxxxxxxxxxxxxx>
- To: <windows2000@xxxxxxxxxxxxx>
- Date: Thu, 5 Oct 2006 14:08:12 -0700
http://dmzweb3.europe.creative.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=561,E=0
000000000159625607,K=4599,Sxi=2,Kb=3dlabs_en,VARSET=ws:http://www.3dlabs
.com,Case=obj(330)
(Link may wrap)
However - it states there that Wildcat 4 series cards do not support
clone mode, only extended desktop mode. FYI - don't know if you're
already aware of this, but 3DLabs is now out of the graphics card
business though support is still available for them.
Regards,
Amer Karim
Nautilis Information Systems
-----Original Message-----
From: windows2000-bounce@xxxxxxxxxxxxx
[mailto:windows2000-bounce@xxxxxxxxxxxxx] On Behalf Of Ron Leach
Sent: October 5, 2006 7:01 AM
To: windows2000@xxxxxxxxxxxxx
Subject: [windows2000] OT-Configuring Dual Monitors
Please pardon the OT. If anyone has experience with Wildcat4 7110
configurations, I'd appreciate your insight on the following:
I am using a Dell Precision 650 with the following monitors:
Default driver (Microsoft driver) for primary monitor (Dell P1130).
Vendor specific driver (Dell) for secondary monitor (Dell 1907FP).
The video adapter I am using is a 3dLabs Wildcat4 7110 with driver
6.6.2.60.
I need the settings for my primary monitor to be 1280x1024 @ 100Hz & set
to
stereo, frame sequential display. The secondary monitor needs to be set
to
1280x1024 @ 60Hz. When I change to the settings for the primary monitor,
the
secondary monitor states that it cannot display this video mode. When I
change the settings for the secondary monitor, I then lose stereo
viewing
capability on the primary monitor.
Under the Wildcat Monitor --> Configure Monitor, shouldn't I be able to
set
my primary monitor (P1130) to the following:
Resolution: 1280x1024
Vertical Refresh rate: 104Hz
Display Mode: Stereo, Frame Sequential Display
and then on my secondary monitor (1907FP)
Resolution: 1280x1024
Vertical Refresh rate: 60Hz
Display Mode: Monoscopic Display (this is the only mode that I can get
1280x1024 @ 60Hz)?
How do I configure the Wildcat4 7110 to do this?
Thanks!
*****************************
New Site from The Kenzig Group!
Windows Vista Links, list options
and info are available at:
http://www.VistaPop.com
*****************************
To Unsubscribe, set digest or vacation
mode or view archives use the below link.
http://thethin.net/win2000list.cfm
*****************************
New Site from The Kenzig Group!
Windows Vista Links, list options
and info are available at:
http://www.VistaPop.com
*****************************
To Unsubscribe, set digest or vacation
mode or view archives use the below link.
http://thethin.net/win2000list.cfm
Other related posts:
