windows2000-bounce@xxxxxxxxxxxxx tried to ruin the keyboard with those words on 12. desember 2002 14:49: > If you are hooking up 2 pc's via a router then you will need > to use crossover cables .. Along with this you will need to > configure your interfaces and make sure they are up and able > to route to each others networks via static routes or some > type of IGP, I am assuming that you have no security in place > ie access-lists etc therefore use pings to make sure that you > have the router's interfaces configured properly before you > start troubleshooting the pc's All the cables are x-over - I had win98/2000 networking real fine earlier... See other post for hookup... -- John Svendsen www.svimen.com ICQ:3488075 TEL:+4740450307 ================================== To Unsubscribe, set digest or vacation mode or view archives use the below link. http://thethin.net/win2000list.cfm