Isn't there some instructions someplace on Bart's PE builder page for this? http://www.nu2.nu/pebuilder/ <http://www.nu2.nu/pebuilder/> Jim -----Original Message----- From: windows2000-bounce@xxxxxxxxxxxxx [mailto:windows2000-bounce@xxxxxxxxxxxxx]On Behalf Of Jennifer Hooper Sent: Wednesday, May 12, 2004 11:51 AM To: 'windows2000@xxxxxxxxxxxxx' Subject: [windows2000] Re: Legacy Help Eh, that didn't work either. Tells me it can't access the partition. Should I try to create a FAT partition via FDISK first? Thanks, Jen _____ From: Jennifer Hooper [mailto:jennifer.hooper@xxxxxxxxxxxxx] Sent: Wednesday, May 12, 2004 7:53 AM To: 'windows2000@xxxxxxxxxxxxx' Subject: [windows2000] Re: Legacy Help Yeah, I am. And I think the boot file situation will work. I have a set I made for the same server, when I was trying to boot the dead SCSI drives. So let me give that a shot. I think that will help.... one or both of these. Funny... I asked around my senior people what they thought I could do, uh... gee... you can't do nothin, install 2000. (Siebel 6.5 doesn't support Windows 2000) Thanks guys!!! Jen