“Add Legacy Hardware” is not the correct way to install Sysvad – see the readme.
________________________________
From: wdmaudiodev-bounce@xxxxxxxxxxxxx <wdmaudiodev-bounce@xxxxxxxxxxxxx> on
behalf of Vincent Burel (VB-Audio) <vincent.burel@xxxxxxxxxxxx>
Sent: Monday, July 23, 2018 11:34:04 PM
To: wdmaudiodev@xxxxxxxxxxxxx
Subject: [wdmaudiodev] Re: SYSVAD & Certification Process Failures...
I have simply used the windows procedure: Device Manager -> Add Legacy Hardware
So, If I resume :
No one validated the SYSVAD Driver (we saw in previous message that it is
"inefficient by design").
No one installed the SYSVAD driver yet.
No one tested the Certification process on it.
Don’t understand…
Vincent Burel
De : wdmaudiodev-bounce@xxxxxxxxxxxxx [mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx] ;
De la part de Tim Roberts
Envoyé : mardi 24 juillet 2018 03:07
À : wdmaudiodev@xxxxxxxxxxxxx
Objet : [wdmaudiodev] Re: SYSVAD & Certification Process Failures...
Vincent Burel (VB-Audio) wrote:
Installation note: Windows Hardware Installation procedure proposes 2 Audio
Tablet Drivers with 2 different versions.
Even if selecting latest version, Windows installs 2x audio tablet drivers (one
is set as non working driver and must be de-installed).
How did you install it? If you used "devcon install", then on Windows 10 you
do get two devices. They changed the non-PnP device installation process in
Windows 10 so that the installation process itself creates a fake device, and
the "devcon" tool creates another one. "pnputil" now seems to be the proper
tool.
--
Tim Roberts, timr@xxxxxxxxx<mailto:timr@xxxxxxxxx>
Providenza & Boekelheide, Inc.
