Hi Nick, Learning from Len's tutorial, I found that you must do a control
plus alt plus E, the make sure the Reverb is set. Usually I think it assigns
itself to slot 1, therefore you have to press either control sift 1 or just
control plus 1 to make sure that it's enabled. Then you must press the tab
key and find the edit button to set the Value. It's set to off by default.
Use your control page up to set the level of the effect. The highest you
can go is Plus 6, but I usually go to a minus 9 as my set volume. It's all
up to you.
James
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Nick D Daniels
Sent: Friday, February 28, 2020 1:38 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: AAX Sends.
Hi Ian.
Yes that is exactly what I was trying to do.
Now Steve has done a video demonstration on routing tracks to sub-mix buses,
How about doing 1 to route tracks to AAX sends? Just a little suggestion.
Cheers again,
Nick.
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of il@xxxxxxxxxxxxx
<mailto:il@xxxxxxxxxxxxx>
Sent: 28 February 2020 21:26
To: vipaudioaccess@xxxxxxxxxxxxx <mailto:vipaudioaccess@xxxxxxxxxxxxx>
Subject: [vipaudioaccess] Re: AAX Sends.
Hi Nick
What is it you're trying to do? For example, I generally insert an Aux send
and say put a reverb in it then send the signal from the track I want reverb
to the aux send. Is this the sort of thing you mean?
If so, then to access the aux send from the track you want to send a signal
from use the keystroke Ctrl plus Alt plus E. This opens up the aux send
dialogue. I can't remember the keystrokes to access the controls of the top
of my head, but they should be in the keystrokes doc.
Hope this helps
Ian
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx>
<vipaudioaccess-bounce@xxxxxxxxxxxxx
<mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx> > On Behalf Of Nick D Daniels
Sent: 28 February 2020 18:19
To: vipaudioaccess@xxxxxxxxxxxxx <mailto:vipaudioaccess@xxxxxxxxxxxxx>
Subject: [vipaudioaccess] AAX Sends.
Hi people. Now in the read me, it talks about the difference between sub-mix
buss and AAX buses, And Steve showed us how to root tracks to sub mix buses,
But the instructions on how to work with AAX sends, seems to be none
existant in the read me. Can anyone help? Cheers.
I'm having a little trouble routing tracks to AAX sends in Samplitude.
