Thanks Lucky It's ok as the BCF2000 has Mackie mode and I am using that.
Thanks anyway!!
_____
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of lucky
Sent: 09 February 2017 19:59
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: How To Flip Faders ON BCF2000 So That They
Become Pans
Hi Phil
It is possible. First of all I have to ask you did you midi learn all of
your faders and other controls of your controller or you use some of the
factory presets?
Whatever it is, most probably that is set as permanent settings.
Press y and on a tree view go to hardware control, tab to the radio buttons
and switch from basic to customize. Look for option midi learn and make sure
it is checked. Then you'll have to activate jaws cursor and look for kind of
table with all of your controls. Look for that one you want to assign, and
then you have to click with right mouse click on the field after the control
name and choose adopt to easy learn.
Then press ok to close the settings and open the mixer.
In the mixer go to pan with arrow keys and without pressing enter or
anything just move that fader up completely then return it down and you
should notice that your pan is moving as well.
Then in order to make it permanent you have to go back to the hardware
control, customize tab, go to your control that is fader you've just
assigned pan on and in the field after the fader name you'll see a word
panorama. Right click on panorama and press enter on the option adopt to
permanent or something not sure about exact name and that's it.
I really hope you understood this explaination because my english is very
bad when I have to explain something with lots of details :D and another
things s that I've recently learnt how the assigning things to controller
works so forgive me if I missed something but basically that's it.
And I'm just joking, I didn't missed something. That's complete process how
I assign any control on my controller.
It's usually easy. If you want to check it out further more, just open the
samplitude manual and press H to go to the hardware control and everything
is written there, assigning controls from samplitude to controller and
assigning things from plug-ins to controller.
----- Original Message -----
From: Phil Muir <mailto:info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
To: vipaudioaccess@xxxxxxxxxxxxx
Sent: Thursday, February 9, 2017 7:30 PM
Subject: [vipaudioaccess] How To Flip Faders ON BCF2000 So That They Become
Pans
Hey all!
Need to flip the faders on a BcF2000 so that I can control the pans as
faders. Can I do that and if so, how?
Regards, Phil Muir
Accessibility Training
Telephone: UK+44-1747-228-459
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
www.accessibilitytraining.co.uk/
