Hey Phil, here's how it works in Sonar with the BCF emulating a Mackie.
Remember that lower shift is the top left button in the group of four
closest to the unit's visual display. M1 is immediately to its right.
from that BCF2000 by Feel Guide:
"Flip mode flips the assignments between your faders and v-pots .
Press Lower Shift+M1 to activate Flip. The first press duplicates the
v-pot assignments on your faders. The second press of Lower Shift+M1
swaps assignments, so your faders now control what the v-pots were
assigned to, and your v-pots now control what the faders were
assigned to. The third press of Lower Shift+M1 returns to the default.
Here's an example. In track Multi, with the faders normally
assigned to track volumes and v-pots assigned to track pans, pressing
Lower Shift+M1 assigns both v-pots and faders to pans. The second
press of Lower Shift+M1 swaps the assignments, so v-pots now control
volumes and faders control pans. The third press of Lower Shift+M1
returns things to their default, with faders controlling volume and
v-pots controlling pan."
Hope that helps over in Samplitude land.
Chris
At 01:30 PM 2/9/2017, you wrote:
Hey all!
Need to flip the faders on a BcF2000 so that I can control the pans as faders. Can I do that and if so, how?
Regards, Phil Muir
Accessibility Training
Telephone: UK+44-1747-228-459
Mobile: UK +44-7968-136-246
E-mail:
<mailto:info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
<http://www.accessibilitytraining.co.uk/>www.accessibilitytraining.co.uk/
