Hi Phil
It is possible. First of all I have to ask you did you midi learn all of your
faders and other controls of your controller or you use some of the factory
presets?
Whatever it is, most probably that is set as permanent settings.
Press y and on a tree view go to hardware control, tab to the radio buttons and
switch from basic to customize. Look for option midi learn and make sure it is
checked. Then you'll have to activate jaws cursor and look for kind of table
with all of your controls. Look for that one you want to assign, and then you
have to click with right mouse click on the field after the control name and
choose adopt to easy learn.
Then press ok to close the settings and open the mixer.
In the mixer go to pan with arrow keys and without pressing enter or anything
just move that fader up completely then return it down and you should notice
that your pan is moving as well.
Then in order to make it permanent you have to go back to the hardware control,
customize tab, go to your control that is fader you've just assigned pan on and
in the field after the fader name you'll see a word panorama. Right click on
panorama and press enter on the option adopt to permanent or something not sure
about exact name and that's it.
I really hope you understood this explaination because my english is very bad
when I have to explain something with lots of details :D and another things s
that I've recently learnt how the assigning things to controller works so
forgive me if I missed something but basically that's it.
And I'm just joking, I didn't missed something. That's complete process how I
assign any control on my controller.
It's usually easy. If you want to check it out further more, just open the
samplitude manual and press H to go to the hardware control and everything is
written there, assigning controls from samplitude to controller and assigning
things from plug-ins to controller.
----- Original Message -----
From: Phil Muir
To: vipaudioaccess@xxxxxxxxxxxxx
Sent: Thursday, February 9, 2017 7:30 PM
Subject: [vipaudioaccess] How To Flip Faders ON BCF2000 So That They Become
Pans
Hey all!
Need to flip the faders on a BcF2000 so that I can control the pans as
faders. Can I do that and if so, how?
Regards, Phil Muir
Accessibility Training
Telephone: UK+44-1747-228-459
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
www.accessibilitytraining.co.uk/