John, I feel your pain. I plunked down a serious piece o' change in
2013 to get my 1640I, and thinking that I might not be able to use it
in Windows 10 frankly makes my stomach turn. Maybe that driver will
still work. I don't think so though.
On Sun, 6 Nov 2016 10:26:52 -0800, you wrote:
Hi Steve,--
Thank you! And like I told Phil, I'm not in any hurry as I'm merely a
greenhorn with digital recording. I have a lot to learn, and in the
meantime, I am now looking at upgrading my mixing board for W10 compliance.
I'm asking everyone I know: What fire wire board is fully accessible. And I
don't know at this time if I should be looking at a control surface or a
regular analog mixer. So I not only have a lot to learn about digital
recording, but I am also learning my new Motif as well. I am excitedly
looking forward to finally having it all up and running and ready for
recording!
Thanks again Steve for all you guys are busy doing,
John Chilelli
Erie, PA
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Spamer
Sent: Saturday, November 5, 2016 4:06 AM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Help with quantizing using samplitude
Hi John, just to give you a little background to the project, as this will
make it clearer on the objectives etc.
Ok, so we started in Windows 7 with Jaws script and HSC, probably around an
80%/20% split in Jaws script's favour. This was a destination we needed to
get to for reasons I won't bore you with, but we got there and launched the
solution at the beginning of July.
Of course, any solution has issues and issues were expected, but we
addressed them as they came in. now, to my point. In the 3 or so months
since launching the script/HSC solution, we have had to deal with some
problems out of our hands. For example a big issue with ProX2 builds higher
than V176, which took a long time to resolve with magix. when that was
solved, we then jumped up 2 builds to V256, which brought some changes that
needed addressing. Then, ProX3 was launched and people were also mentioning
the Windows 10 thing. Add to that, that HotspotClicker was also having an
issue with Jaws versions higher than 15, plus all the challenges that
Windows 10 brings to the table....I think there has been a hell of a lot of
things to deal with.
Ok, so publically, the current situation is we are running a Jaws script/HSC
solution under Windows 7...and the next thing in view is Windows 10. This
has always been something to do, but as I have stated above, sometimes we
need to go to other destinations and deal with other stuff before we can
then move on to where we need to go. Ultimately, this solution will be
screen reader independent and thoughts have already turned to that for the
future.
This weekend I will be putting out a massively amended solution to the beta
testers, which is Windows 10 ready, purely Jaws script and does not require
HSC to run. hSC is now only offering 3rd party plugin access. However, the
decision and code needed on whether a user wants HSC for this plugin support
hasn't yet been done, but it will in further updates.
My hope for this project was always to be a project with longevity and
community support...and I hope we will continue building this community well
into the future. We have an amazing relationship with magix and there are
many exciting opportunities to come I'm sure, but it would be very hard to
keep on rolling if it wasn't for all you users investing and believing in
the project, plus the amazing work and effort people like Phil and Len etc
put in. So, the future is very bright, but it is ever evolving. Best Steve.
-----Original Message-----
From: John Chilelli
Sent: Saturday, November 5, 2016 1:25 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Help with quantizing using samplitude
Hi Steve and all,
John Chilelli here. I'm just getting started with Samplitude and fairly new
to recording on a dawn. I just got a new computer and was trying to decide
if I should go to Win 10. But now I see that the scripts will not work in
os10. Correct? Any hints on when you guys will be updating to Win 10?
Oh well, here's to starting over again... <smile>
John
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Spamer
Sent: Tuesday, November 1, 2016 3:07 AM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Help with quantizing using samplitude
Hi Sebastian and welcome to the list, it's great to have you. As Phil said,
you're probably best quantizing objects first, which is just basically a
selected piece of data. Don't get mixed up between ranges and object
selection, as even though they can overlap and do the same thing sometimes,
they have different purposes.
Regarding selecting an object. The best way to think of it is like an
accordian. When the timeline/zoom ratio is expanded, you can see objects
that otherwise would be hidden, due to the fact they were too small.
For example:
If I have a 2 bar object (drums ), recorded between bars 2 and 4, I would
only see that object if the timeline was not compressed. So, the timeline
could read:
1, 7, 19, 27 etc etc etc and I would not see that object, as it is hidden
between the contracted timeline, namely bars 1 - 7.
So, I would expand the timeline and zoom in to show bars 1, 2, 3, 4
etc...then the object would be visible.
Also, as Phil said, this is normal behaviour of samplitude for all users.
Jaws can only report if an object is selected or not if it is visible, the
same way it would be for a sighted person.
There are a few You Tube videos you may find useful...and more will be added
in the coming months, but due to a lot of development of the scripts, there
aren't as many as I would like. After the next release of the scripts, we
will be in a much more stable and settled position, as we will be supporting
Windows 10 and the scripts will only be Jaws script, HSC will be primarily
for plugin support.. Best steve.
-----Original Message-----
From: Phil Muir
Sent: Tuesday, November 1, 2016 9:39 AM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Help with quantizing using samplitude
Hi Sébastien. Welcome to the list. Nice to see you posting here. I think
you may be missing a step here. Note: I haven't played much with range
selection but have managed to achieve what I wanted by splitting, selecting,
deleting objects etc and placing markers in at the start and end points then
selecting the range between the markers. Before starting your range
selection you first need to select an object with control Alt left or
Control Alt Right Arrow. Note: Jaws may struggle to see the object if it
isn't on screen. This isn't a Jaws issue as such as sighted users also
encounter this. If this happens then you may need to zoom in or out. To
quickly zoom in use the Samplitude keystrokes Control+Alt+Shift+- or
Control+Alt+Shift+=.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Sébastien Joanisse
Sent: 01 November 2016 01:19
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Help with quantizing using samplitude
Hi all,
I'm a new comer to samplitude and I really hope you guys can help me.
First let me add that I love samplitude so much. Here's my issue. I simply
can't quantize midi. Here's what I do.
1. Insert a new midi track
2. Press f9 on that track and then insert addictive drums as a VST.
3. Follow the instructions to get all mono tracks and press ok.
4. Arm the track, record some drums
5. Use the right arrow to go just before I want it to quantize, use
shift+right arrow to select a few bars. I already have my arrow keys
setup so they move by bars.
6. Press control+windows+f11 to set the selection to the track.
7. Press control+q, and I get the same message no matter what I try:
"No object selected for quantizing"
I tried using control+windows+q to basically quantize while I play, and that
works well, however I also want to quantize by selecting, and I haven't been
able to accomplish that. Also, can someone explain me the quantize menu
(control+shift+q"? I'm used to sonar so it would be nice if someone can
explain it to me. Let me add though that there is no way I will go back to
sonar. Samplitude seems smoother for me to use and a lot better, just my
opinion. Anyway, hope someone can help.
Thanks in advance!
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
