You are very welcome!
On 1 November 2016 20:54:14 GMT+00:00, "Sébastien Joanisse" <seb2314@xxxxxxxxx>
wrote:
I'll say it again, thanks so much for the great support
On 11/1/16, Phil Muir <info@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Yes that is the set to get and it's all for the Accessible.not
On 1 November 2016 20:39:54 GMT+00:00, "Sébastien Joanisse"
<seb2314@xxxxxxxxx> wrote:
Seriously??? I didn't know supperior drummer 2 was accessible with
samplitude! And would I be able to actually have seperat tracks for
the kick, snare, etc? I believe it's actually this feature, if I'm
inwrong:
•The 23 Mic outputs that can be used to assign the microphones to
separate outputs in Sonar
Can you confirm if this set is the right one to purchase?
http://www.accessibilitytraining.co.uk/superiorform.html
Thanks so much
On 11/1/16, Phil Muir <info@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Well there is always Superior Drummer 2 which has SamplitudeHotSpotClicker
support which I developed. You can read about what you can access
knowthat
here:
http://www.accessibilitytraining.co.uk/superior.html
Used Superior Drummer 2 here for years and it works well.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf of Sébastien
Joanisse
Sent: 01 November 2016 19:57
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Help with quantizing using samplitude
Thanks a lot. After doing that and setting them up I think I do
Usingwhat my problem is, hopefully someone can confirm this for me.
Sébastiensonar, after importing the addictive drums VST I pressedcontrol+alt+u
to enable all kit outputs. This hotkey does not work in samplitudecan
using the hss of addictive drums. Is there another drum VST that I
use with samplitude? I don't mind buying hotspot sets if that's thethere.
only way. I'd prefer a vst with a lot of kits. Thanks again!
On 11/1/16, Phil Muir <info@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Double press Alt and M to get into the output menu and change that
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of
samplitudeJoanisse
Sent: 01 November 2016 17:02
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Help with quantizing using
wouldthe
Update: After checking the settings I had in sonar, the inputs on
example,audio tracks created by addicted drums were already set. For
thethe kick and snare audio tracks' inputs were already set to
kick/snare. However using samplitude the inputs are set to either
anotherleft or right inputs of my sound card, and I don't know how to set
them to either the kick, snare, etc. Thanks once again
On 11/1/16, Sébastien Joanisse <seb2314@xxxxxxxxx> wrote:
Worked like a charm, thanks so much! Now unfortunately here's
pressissue. After recording my drums I want to freeze the synth, so I
andcontrol+shift+i to go to the VST manager, select addictive drums,
monoselect freeze. When I inserted it before recording I set it up so
Sébastientracks were created already for the kick, snare, etc. But After
freezing the synth I get no drum sound at all. Thanks once again.
On 11/1/16, Phil Muir <info@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
You are very welcome! That's what we are here for!
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of
samplitudeJoanisse
Sent: 01 November 2016 14:56
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Help with quantizing using
Thanks
Wow. Thanks so much for explaining, I'll definitely try that.
once again for the great support
On 11/1/16, Phil Muir <info@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Well if you only want to quantize a couple of bars then you
thatyousplitthe
object at the start and end by pressing the letter T. E.G. if
splitwanted
to
quantize from bar 4 to 6 then you would go to bar 4 press T to
then
go
to bar 6 and press T to split again. Then you would select
checkobject isobject
with
Alt left or alt right arrow then quantize it. Tip: one the
selected then you can use the keystroke Control+spacebar to
Bythat
Sébastienyou
have the correct object selected.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of
samplitudeJoanisse
Sent: 01 November 2016 13:04
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Help with quantizing using
quantize
Sounds good to me. So instead of quantizing ranges I should
how toobjects? I actually tested this and it worked, how ever I'm not
entirely sure how to handle objects. Would you mind explaining
create an object which only contains 2 drum bars, for example?
mepressing alt+shift+v and selecting it by using shift+a allowed
thingto
againquantize, but it quantized the whole drum track. Thanks so much
Asfor the help.
On 11/1/16, Steve Spamer <stevespamer68@xxxxxxxxx> wrote:
Hi Sebastian and welcome to the list, it's great to have you.
objectPhilsaid,
you're probably best quantizing objects first, which is just
basically
a
selected piece of data. Don't get mixed up between ranges and
selection, as even though they can overlap and do the same
thelike ansometimes,
they have different purposes.
Regarding selecting an object. The best way to think of it is
seeaccordian. When the timeline/zoom ratio is expanded, you can
small.objects
that otherwise would be hidden, due to the fact they were too
4, I
For example:
If I have a 2 bar object (drums ), recorded between bars 2 and
would
only see that object if the timeline was not compressed. So,
ittimeline
could read:
1, 7, 19, 27 etc etc etc and I would not see that object, as
beis
3, 4hidden
between the contracted timeline, namely bars 1 - 7.
So, I would expand the timeline and zoom in to show bars 1, 2,
alletc...then the object would be visible.
Also, as Phil said, this is normal behaviour of samplitude for
willusers.
Jaws can only report if an object is selected or not if it is
visible,
the
same way it would be for a sighted person.
There are a few You Tube videos you may find useful...and more
scripts,beadded
in the coming months, but due to a lot of development of the
bethere
aren't as many as I would like. After the next release of the
scripts,
we
will be in a much more stable and settled position, as we will
supporting
Windows 10 and the scripts will only be Jaws script, HSC will
endsamplitudeprimarily
for plugin support.. Best steve.
-----Original Message-----
From: Phil Muir
Sent: Tuesday, November 1, 2016 9:39 AM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Help with quantizing using
here. I
Hi Sébastien. Welcome to the list. Nice to see you posting
withthink
you may be missing a step here. Note: I haven't played much
splitting,range
selection but have managed to achieve what I wanted by
selecting,
deleting objects etc and placing markers in at the start and
orrangepoints
then
selecting the range between the markers. Before starting your
left orselection you first need to select an object with control Alt
objectControl Alt Right Arrow. Note: Jaws may struggle to see the
usersif
it
isn't on screen. This isn't a Jaws issue as such as sighted
also
encounter this. If this happens then you may need to zoom in
samplitudeout.
Control+Alt+Shift+- orTo
quickly zoom in use the Samplitude keystrokes
SébastienControl+Alt+Shift+=.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of
Joanisse
Sent: 01 November 2016 01:19
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Help with quantizing using
ok.help me.
Hi all,
I'm a new comer to samplitude and I really hope you guys can
issue. IFirst let me add that I love samplitude so much. Here's my
VST.simply can't quantize midi. Here's what I do.
1. Insert a new midi track
2. Press f9 on that track and then insert addictive drums as a
3. Follow the instructions to get all mono tracks and press
quantize,4. Arm the track, record some drums
5. Use the right arrow to go just before I want it to
arrowuse
shift+right arrow to select a few bars. I already have my
track.keys
setup so they move by bars.
6. Press control+windows+f11 to set the selection to the
I7. Press control+q, and I get the same message no matter what
metry:
play,"No object selected for quantizing"
I tried using control+windows+q to basically quantize while I
selecting,and that works well, however I also want to quantize by
explain meand
I haven't been able to accomplish that. Also, can someone
would bethe quantize menu (control+shift+q"? I'm used to sonar so it
there isnice if someone can explain it to me. Let me add though that
no way I will go back to sonar. Samplitude seems smoother for
canto
use and a lot better, just my opinion. Anyway, hope someone
modes,help.
Thanks in advance!
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation
modes,visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation
modes,visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation
modes,visit--
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation
modes,visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation
visitvisit
visit//www.freelists.org/list/vipaudioaccess--
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes,
visit//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes,
visit--//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes,
visit//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes,
visit//www.freelists.org/list/vipaudioaccess--
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes,
//www.freelists.org/list/vipaudioaccessvisit
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes,
//www.freelists.org/list/vipaudioaccess--
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes,
--//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
Regards,
Accessibility Training
Telephone: UK +44-1747-228-459
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx
URL:
http://www.accessibilitytraining.co.uk
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess