Hi
Absolutely the patch is certainly necessary for some but not for all.
iOS11 on it's own is not the fail condition. In my client's case,
connection was successful without the patch using iOS11.2.2 on iPhone 8.
On 12/01/2018 16:17, Jim McCarthy wrote:
Amy,
We did use the patch Germany identified for my wife and she has expressed
real pleasure in the connecting of her unit using that patch. She is not the
most frequent user among us but she has had the patch installed for a couple
weeks, I think and she remains satisfied that it connects as she needs when
she needs.
Jim McCarthy
-----Original Message-----
From: varioultra-bounce@xxxxxxxxxxxxx
[mailto:varioultra-bounce@xxxxxxxxxxxxx] On Behalf Of Amy Ruell
Sent: Friday, January 12, 2018 11:20 AM
To: varioultra@xxxxxxxxxxxxx
Subject: [varioultra] Re: Connecting to iOS11
Hi David and, all
I have seen this happen occasionally to, but according to Baum Germany
staff they identify this as a consistent problem which is why the patch was
created. Thanks.
Amy Ruell
Sent from my iPhone
On Jan 12, 2018, at 10:34 AM, Dave Williams <dwilliamsuk@xxxxxxxx> wrote:
Hi
I'm aware some of you have experienced difficulties connecting VU to
iOS11. I'm sharing the following as it may not be necessary to install
the patch in all cases. Thus potentially saving you the time and
effort of downloading and installing the update. This may not work for
everyone. I hope it is useful for someone.
This afternoon I successfully connected a VarioUltra 40 software
version
1.42 to a client's iPhone 8 running iOS11.2.2. Crucially the iPhone
had not been previously connected to any braille display, including
VarioUltra. Plus the VU40 in question did not have the November 24
patch installed. The VU was simply running the original 1.42 release
from September 19.
With VarioUltra discoverable in Settings> Bluetooth,I initiated the
pairing from iPhone> Settings> General> Accessibility> VoiceOver>
Braille. Everything worked as per the instructions in the VarioUltra
user guide. Except, iPhone popped up the dialogue incorrectly
reporting an unsuccessful connection. However, in Display mode on
VarioUltra, we could read VoiceOver output. So simply dismiss the
dialog and carry on as normal.
Hope this helps.
Kind regards
--
Dave Williams
Independent Accessibility Consultant
https://nam02.safelinks.protection.outlook.com/?url=www.DaveWilliams.co.uk&data=02%7C01%7C%7C328088b62cba47445bad08d559d925e1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636513711525846458&sdata=5K5zTWhpGN1PNOkYhYBK6XbHiEzdmmWCHV0W0aKFnUM%3D&reserved=0
+447890396117
@dwilliamsuk
