[varioultra] Re: Connecting to iOS11

  • From: "Jim McCarthy" <jmccarthy@xxxxxxxxx>
  • To: <varioultra@xxxxxxxxxxxxx>
  • Date: Fri, 12 Jan 2018 11:17:12 -0500

Amy,
We did use the patch Germany identified for my wife and she has expressed
real pleasure in the connecting of her unit using that patch. She is not the
most frequent user among us but she has had the patch installed for a couple
weeks, I think and she remains satisfied that it connects as she needs when
she needs.
Jim McCarthy

-----Original Message-----
From: varioultra-bounce@xxxxxxxxxxxxx
[mailto:varioultra-bounce@xxxxxxxxxxxxx] On Behalf Of Amy Ruell
Sent: Friday, January 12, 2018 11:20 AM
To: varioultra@xxxxxxxxxxxxx
Subject: [varioultra] Re: Connecting to iOS11

Hi David and, all
I have seen this happen occasionally to, but according to Baum  Germany
staff they identify this as a consistent problem which is why the patch was
created. Thanks.
Amy Ruell


Sent from my iPhone

On Jan 12, 2018, at 10:34 AM, Dave Williams <dwilliamsuk@xxxxxxxx> wrote:

Hi


I'm aware some of you have experienced difficulties connecting VU to 
iOS11. I'm sharing the following as it may not be necessary to install 
the patch in all cases. Thus potentially saving you the time and 
effort of downloading and installing the update. This may not work for 
everyone. I hope it is useful for someone.


This afternoon I successfully connected a VarioUltra 40 software 
version
1.42 to a client's iPhone 8 running iOS11.2.2. Crucially the iPhone 
had not been previously connected to any braille display, including 
VarioUltra. Plus the VU40 in question did not have the November 24 
patch installed. The VU was simply running the original 1.42 release 
from September 19.


With VarioUltra discoverable in Settings> Bluetooth,I initiated the 
pairing from iPhone> Settings> General> Accessibility> VoiceOver> 
Braille. Everything worked as per the instructions in the VarioUltra 
user guide. Except, iPhone popped up the dialogue incorrectly 
reporting an unsuccessful connection. However, in Display mode on 
VarioUltra, we could read VoiceOver output. So simply dismiss the 
dialog and carry on as normal.

Hope this helps.

Kind regards
--
Dave Williams
Independent Accessibility Consultant
www.DaveWilliams.co.uk
+447890396117
@dwilliamsuk




Other related posts: