[uae] Re: Source code snapshot - bsdsocket problems
- From: Karl Dietrich Bamler <amiga@xxxxxxxxxxxxxxxxxxxxxxx>
- To: uae@xxxxxxxxxxxxx
- Date: Thu, 9 Sep 2004 20:39:12 +0200
Am Donnerstag, 9. September 2004 20:17 schrieb Karl Dietrich Bamler:
Finally i noticed that there are some hopefully usefull shelloutputs.
I have compiled with -enable-bsdsock, but i am going to test it with the
-enable-bsdsock-new emulation as well.
Found 0 joysticks
Found x11pc raw keyboard mapping
Using cooked keymap
Opening cfgfile: /home/kadi/.uaerc...okay.
Testing the RDTSC instruction ... done.
Calibrating delay loop.. ok - 2011.01 BogoMIPS
Testing system sleep function.......
Average duration of a 1ms sleep: 2 ms
Found 0 joysticks
Found x11pc raw keyboard mapping
Using raw keymap
NATMEM: shmget() failed with size 0x08000000. Disabling direct memory access.
Follow sprite mode set
No disk in drive 0.
Resetting frame rate hack
Building CPU table for configuration: 68040
1866 CPU functions
Building CPU function table (4 0 0).
Max CPUID level=1 Processor is AuthenticAMD
have_cmov=1, have_rat_stall=1
JIT: Setting signal handler
JIT: Building Compiler function table
Supposedly 42381 compileable opcodes!
Resolution: 800 x 600 x 32
Resetting frame rate hack
reset at 0
Don't care mouse mode set
PAL mode, 50Hz
Byte put to custom register DA8000 PC=00F8010A
Byte put to custom register DA8000 PC=00F80152
Fastmem (32bit): mapped @$10000000: 128 MB Zorro III fast memory
Card 1 (ZorroIII) done.
UAEGFX-card: mapped @$18000000
Card 2 (ZorroIII) done.
Filesystem: mapped memory @$e90000.
Card 3 (ZorroII) done.
JIT: Reverting to "indirect" access, because canbang is zero!
Byte put to custom register DFF110 PC=00F8BD96
Byte put to custom register DFF111 PC=00F8BD96
Byte put to custom register DFF112 PC=00F8BD96
Byte put to custom register DFF113 PC=00F8BD96
Byte put to custom register DFF114 PC=00F8BD96
Byte put to custom register DFF115 PC=00F8BD96
Byte put to custom register DFF116 PC=00F8BD96
Byte put to custom register DFF117 PC=00F8BD96
FS: mounted virtual unit st0
FS: mounted virtual unit st1
FS: mounted virtual unit st2
FS: mounted HDF unit DH3
RDB: fakefilesys, trying to load
'/home/kadi/LinuxUAE/KadisA1200/FastFileSystem'
,
dostype 0x444F5300
RDB: filesys not found
PTEST @$1002bb6c
SetDAC()
Resolution: 1024 x 768 x 32
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
bsdsocklib_abortSomething failed. Fix me
DMACON: 3f0 INTENA: 602c INTREQ: 60 VPOS: 0 HPOS: 3
COP1LC: 00001020, COP2LC: 00001178 COPPTR: 00001180
DIWSTRT: 2c81 DIWSTOP: f4c1 DDFSTRT: 0038 DDFSTOP: 0058
BPLCON 0: 0200 1: 0000 2: 0024 3: 0c00 4: 0011
Average frame time: 19.498335 ms [frames: 33040 time: 644225]
NATMEM: Failure to find mapping at 0x414c1008
NATMEM: Failure to find mapping at 0x494c2008
NATMEM: Failure to find mapping at 0xaa10e28
NATMEM: Failure to find mapping at 0x4b4c3008
NATMEM: Failure to find mapping at 0x4b544008
Other related posts:
