> > -> DF2: and DF3: don't seem to work at all. When I insert a disk > > image into any, nothing happens (the same files work fine when > > inserted into the other two drives). This never occured to my > > before, but now I've checked back with 0.8.25, and it's the same > > there. > > Yes. These are probably disabled in your config. > > By default, these are disabled with the options: > > floppy2type=-1 > floppy3type=-1 > > Set these to 0 to enable them (the GUI should really check whether > these are enabled before putting up a requester). That did it. Thanks!