[torontocbm] Re: Connecting my A500/A2000 to LCD (VGA connector) Monitor

  • From: "Miraglia, Walter" <Walter.Miraglia@xxxxxxxxxxx>
  • To: "torontocbm@xxxxxxxxxxxxx" <torontocbm@xxxxxxxxxxxxx>
  • Date: Fri, 23 Feb 2018 22:00:39 +0000

Those scan converters can be purchased from eBay for around $25.00 or so.  It 
would be on a slow boat from China but they are not very expensive at all.

I have one, I just have to make a cable and try it.

This one is $16.00 US.


Specifications:
Color: Multicolors
Material: Electronic components
Support VGA output (640 x 480, 800 x 600, 1024 x 768, 1360 x 768)
CGA, EGA signal auto scan (15kHz, 24khz, 31khz)
YUV component signal auto scan (480i, 576i, 720i, 1080i, 480p, 576p, 720P, 
1080P)
Product size: 12 * 10 * 1cm

Packing List:
1 x HD9800 HD Decoding Game Video Converter Board
2 x Connection Cable


Do a search on eBay for HD9800 HD Decoding Game Video Converter


Hope this helps?



On Feb 23, 2018, at 4:36 PM, Rob Adlers 
<robadlers@xxxxxxxxxxx<mailto:robadlers@xxxxxxxxxxx>> wrote:

I looked into this as well. Apparently there is a newer lcd monitor available 
via Canada Computers which can handle the Amiga vga output. Have to look for 
the make / model.

Sent from my BlackBerry - the most secure mobile device - via the Rogers Network
From: capjtkirk67@xxxxxxxxx<mailto:capjtkirk67@xxxxxxxxx>
Sent: February 23, 2018 4:33 PM
To: torontocbm@xxxxxxxxxxxxx<mailto:torontocbm@xxxxxxxxxxxxx>
Reply-to: torontocbm@xxxxxxxxxxxxx<mailto:torontocbm@xxxxxxxxxxxxx>
Subject: [torontocbm] Connecting my A500/A2000 to LCD (VGA connector) Monitor


I have been "surfing" for information on how to connect my A500/A2000 to an LCD 
monitor.

While it would be nice to have one of the new Scan Doublers that are available, 
they don't fall within my budget right now.

I have seen a few posting on using Amiga RGB to SCART cables and then SCART to 
VGA.

I found the Amiga RGB to SCART cable on the AmigaKit Store website.  It has a 
Female Amiga RGB connector (with audio) on one end and a Male SCART on the 
other.

So I am assuming all I would need to do is find a cable that has a Female SCART 
connector on one end and regular VGA on the other end.  Am I correct to assume 
this would work?

I have searched a number of sites including ebay and amazon and haven't been 
able to find a cable that has Female SCART to VGA.  Does anyone know where I 
might be able to purchase one?

Thanks for your help! :)

Ken Rath

Other related posts: