[THIN] Re: OT: External to internal Web Site setup
- From: "Ryan Lambert" <rlambert@xxxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Wed, 5 Mar 2003 14:09:29 -0500
Also check that you can telnet to that external IP address on port 80
and get an IIS bad request dialog after randomly banging the keyboard.
You might be able to anyway if the firewall has an http GUI config...=20
Just to make sure your policy is set correctly.
-----Original Message-----
From: Ryan Lambert=20
Sent: Wednesday, March 05, 2003 2:05 PM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: OT: External to internal Web Site setup
IIS I assume.
In your configuration, do you have the web site configured to use "All
Unassigned", and the headers specified correctly for your website's URL,
so it knows which virtual site to load?
Eg:=3D20
Right click the site in IIS
Next to IP address, "All Unassigned"
Click Advanced
Make sure that on port 80, the header for internalserver.yourdomain.com
is created. =3D20
To do that, you just click add, leave it at port 80 and All
Unassigned... and for host header address type in the URL of your
website.
Hope that helps.
Ryan
-----Original Message-----
From: Mario Villarreal [mailto:MarioV@xxxxxxxxx]=3D20
Sent: Wednesday, March 05, 2003 1:57 PM
To: 'thin@xxxxxxxxxxxxx'
Subject: [THIN] OT: External to internal Web Site setup
Forgive the off topic post. Normally I wouldn't ask but I have a
meeting in
a few hours where this problem will come up.
=3D20
We currently have an "internal" web server that we use for some testing
of
nfuse and internal program stuff. Our true website is hosted by our ISP
on
their servers outside our network. We are trying to have a link on our
External site point to the internal webserver so we can access some
internal
data. I had our ISP add a DNS entry point
"internalserver.ourdomain.com"
to 333.333.333.333 (real world ip) which is in turn redirected through
our
firewall to the internal ip. I can ping through but I can't get the
default
page to pull up. What am I missing? =3D20
=3D20
Any help or location to find information on this topic would be greatly
appreciated. This is our first project like this. =3D20
=3D20
=3D20
Internal server is W2K=3D20
=3D20
TIA
Mario
*********************************************************
This Week's Sponsor - ThinPrint
Simply the best print solution for Citrix
Metaframe and Microsoft Terminal Services!
http://www.thinprint.com
**********************************************************
For Archives, to Unsubscribe, Subscribe or=3D20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
*********************************************************
This Week's Sponsor - ThinPrint
Simply the best print solution for Citrix
Metaframe and Microsoft Terminal Services!
http://www.thinprint.com
**********************************************************
For Archives, to Unsubscribe, Subscribe or=20
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
*********************************************************
This Week's Sponsor - ThinPrint
Simply the best print solution for Citrix
Metaframe and Microsoft Terminal Services!
http://www.thinprint.com
**********************************************************
For Archives, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
http://thethin.net/citrixlist.cfm
Other related posts:
