I used version 6 and had no problems whatsoever... excellent software, even with remapped drives on the blades. -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx]On Behalf Of Jim Kenzig Kenzig.com Sent: 19 January 2005 16:52 To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Imaging HP temrinals with altiris? You may need a different version of ibmaster.exe (or whatever they are using now, I think it is now called rdeploy.exe or something like that) we have found different versions work better than others depending on the client and they fixed issues in following versions that gave error messages like you speak of below.. The older version 4 ibmaster.exe actually works on more things but then the images it creates aren't readable by the newer rdeploy.exe versions. JK Can anyone suggest a decent step-by-step guide to imaging HP T5300, 5500 and 5700 terminals using altiris? I've got one of each in for evaluation and all utterly refuse to cooperate with my imaging attempts. I get a zero byte img file on the Altiris server and the client reboots over and over again. ============================================================================== This message is for the sole use of the intended recipient. If you received this message in error please delete it and notify us. If this message was misdirected, CSFB does not waive any confidentiality or privilege. CSFB retains and monitors electronic communications sent through its network. Instructions transmitted over this system are not binding on CSFB until they are confirmed by us. Message transmission is not guaranteed to be secure. ==============================================================================