hmmmm. there have been problems there. Thanks On Fri, May 18, 2012 at 3:27 PM, Raffensberger, Stephen D <sraffens@xxxxxxxxxxx> wrote: > > Hi Greg, > > I don't have any specific help but maybe I can point you in the right > direction. We had a similar issue with logins over VPN. Somebody closed a > port that made Windows authentication take longer. Surprisingly, this slower > authentication affected printer mapping. Users with only one printer worked > okay while users with 12 printers took upwards of 5 minutes to log in. > > So you might look for things that affect authentication like DNS problems or > recently removed domain controllers. > > Hope this helps. > > Steve Raffensberger > Produban US > sraffens@xxxxxxxxxxx > > -----Original Message----- > From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf > Of Greg Reese > Sent: Friday, May 18, 2012 11:05 AM > To: Thin > Subject: [THIN] Epicor > > seeing some weirdness with Epicor on Windows 2003 and PS 4.5. > > There seems to be a long delay for some users and the time it takes > for printer creation to occur which cause Epicor to not recognize the > have a printer installed. > > Anyone run into this before? > > Some users are fine (most are). The affected users are fine on > another workstation. Which tells me it is a client issue, but I still > need to fix it. > ************************************************ > For Archives, RSS, to Unsubscribe, Subscribe or > set Digest or Vacation mode use the below link: > //www.freelists.org/list/thin > ************************************************ > ************************************************ > For Archives, RSS, to Unsubscribe, Subscribe or > set Digest or Vacation mode use the below link: > //www.freelists.org/list/thin > ************************************************ ************************************************ For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: //www.freelists.org/list/thin ************************************************