I have a Zenith 9-1557 module or C12 chassis with vertical foldover and retrace at the top. I have already replaced the output IC and the three electrolytics (c2100/c2105/c2104) and no improvement. I have checked and replaced c3208 also with no change. The voltages are alright , 25v is 25v and the 11v (pin 2) is 12v. Does anyone have any ideas? Wilf Blakey Blakey TV,Kirkland Lake,Ont wblakey@xxxxxxxxxxxxxxxx ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/