Wilf, Maybe a bad a replacement IC also......try another to be safe. Also check R3209 1ohm 1watt for increase in value. Jeff Stielau Shoreline Electronics Repair 125 Beech Tree Lane Westbrook, CT 06498 860-399-1861 860-664-3535 (fax) jstielau@xxxxxxxx ----- Original Message ----- From: "wilfred blakey" <wblakey@xxxxxxxxxxxxxxxx> To: "tech assist" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, June 25, 2002 6:32 PM Subject: [TechAssist] zenith 9-1557 module,vertical retrace at top of screen > I have a Zenith 9-1557 module or C12 chassis with vertical foldover and retrace at the top. I have already replaced the output IC and the three electrolytics (c2100/c2105/c2104) and no improvement. I have checked and replaced c3208 also with no change. The voltages are alright , 25v is 25v and the 11v (pin 2) is 12v. Does anyone have any ideas? > Wilf Blakey > Blakey TV,Kirkland Lake,Ont > wblakey@xxxxxxxxxxxxxxxx > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/