Mick,first thing I would do is ESR all caps in power supply.If there's a 330@xxxxxx it's probably bad,but check them all...Don of HARTS-TVCR''ASC'' 9-Robert St.,Oromocto,NewBrunswick,CAN Tel#506-357-9785Fax#506-357-6010 ----- Original Message ----- From: "Mick" <mhturbo@xxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, March 10, 2006 5:23 AM Subject: [TechAssist] panasonic vcr, NV-J35 not threading > Hi , > is there a common problem with the panasonic NV-J35 > and other panasonics with the same chasis, Ive got 3 doing the same thing, > I load the cassette and 5 seconds or so later the vcr ejects it out and turns itself off. > Any help would be appreciated, > Mick. > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.