[TechAssist] Re: panasonic vcr, NV-J35 not threading
- From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 9 Mar 2002 08:30:49 -0800
Mick,
Sounds like a mode switch problem.
Hope this helps.
Bill
Premium Technologies
Ocean Park, WA. 98640
Phone: (360) 665-5984
Fax: (775) 860-7747
email: premtech@xxxxxxxxxxxxxx
----- Original Message -----
From: "Mick" <mhturbo@xxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, March 10, 2006 1:23 AM
Subject: [TechAssist] panasonic vcr, NV-J35 not threading
> Hi ,
> is there a common problem with the panasonic NV-J35
> and other panasonics with the same chasis, Ive got 3 doing the same thing,
> I load the cassette and 5 seconds or so later the vcr ejects it out and
turns itself off.
> Any help would be appreciated,
> Mick.
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
