[TechAssist] Re: mitsubishi cs2655r no relay action
- From: "Ron Purkhiser" <rpurkhiser@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 2 May 2002 10:19:04 -0400
Hello Ken, cutting and pasting from WinStips:
Paul put a lot of thought in this one, when you have the list of tips open,
all you have to do
is click on the line of the tip you want to copy and hit ctl + c and it
copies that subject line AND the tip. You don't have to highlight the tip
itself just click on the line in the list.
Now here's the good part, since there 7,000,000 tips in WinStips, ( well
maybe not quite that many ) you can continue doing this for as many lines
as you want to copy.
Then just put your cursor in your letter where you want to tips to appear
and hit ctl + v and all the ones you copied are pasted all at once.
Really neat.
Ron
Mailto:rpurkhiser@xxxxxxxxxx
Ron Purkhiser, Treasurer, NESDA of Ohio
Editor of the Speaker, Nesda of Ohio Newsletter
Enjoy the Speaker Online, www.nesda-ohio.com
Ron's Video Repair
56 Oakhurst Dr.
Munroe Falls, OH 44262
Phone and Fax. 330-688-6624
----- Original Message -----
From: <gulftech@xxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, May 01, 2002 9:05 PM
Subject: [TechAssist] Re: mitsubishi cs2655r no relay action
>
> Hi Charles.
>
> Don't have much on that model, but here is what I found in Winstips.
> (Wish I knew how to cut and paste tips from Winstips.)
>
> Check R908 for increased value. Should be 180K.
>
> Check for shorted 33v zener D582.
>
> Of course, on any Mitsubishi, check for leaky caps in the power supply
> and resultant pcb damage, as well as cracked solder connections. I know
> you know that, but list it for the benefit of new techs.
>
> Not much, my friend, but I hope it helps.
>
>
> Ken Smith
> Gulf Technical Services
> 3034 Gulf Breeze Parkway
> Gulf Breeze, FL 32563
> 850-934-8324 (Voice) 850-932-0819 (Fax)
>
>
> On Wed, 1 May 2002 17:01:10 -0500 "repair1" <repair1@xxxxxxxxxxxxx>
> writes:
> >
> > Customer found this set, so he says, and is willing to spend what I
> > consider
> > a fair amount to repair it, there is no sams for this unit, when set
> > is
> > plugged into ac, antenna switching relay clicks, power on with
> > keyboard ,
> > no action, jumper relay have raster only crt looks good, have 5v and
> > clock(found those rather easily), if any one has syscon and power
> > supply
> > section of print, or any pinouts for me I would appreciate it.
> > charles betzler
> > Best Electronics
> > repair1@xxxxxxxxxxxxx
> >
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > ------------------------------------------
> > ***NEW*** Tips Added Instantly!!!***
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
>
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
