Make sure to discharge the cap first. Deadly -- Best regards, Bil Green 2001 TV VCR Mammoth Lakes, CA 93546 760-934-2001 mailto:tv.vcrrepair@xxxxxxxxxxx Friday, December 26, 2003, 11:34:12 AM, you wrote: E> With my hv probe, the ground connected to one of the leads going to the mag E> its measuring about 3 kv, which would be -3kv, if the mag is getting E> filiment voltage, does that pretty much insure everything is working ok, and E> the mag is bad? E> Ed Video Pro-Tech Mesa AZ E> ----- Original Message ----- E> From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxxxxxxx> E> To: <techassist@xxxxxxxxxxxxx> E> Sent: Friday, December 26, 2003 12:22 PM E> Subject: [TechAssist] Re: microwave >> This may be rather unconventional but in such as case I use a TV high >> voltage probe, BUT you must connect the ground lead to the magnetron and E> put >> the tip of the probe to the casing (ground) because it is negative DC I am >> measuring to see if the magnetron is getting or not (about -1.5 to -2KV). E> If >> so, the magnetron must be bad. You should measure infinite resistance from >> the filament to the body of the magnetron so I don't see how you can E> measure >> an open on the magnetron (except between the filaments). >> >> Bob Waterman, CET® #RI-28 >> Master Technician License #9109 >> Service Manager / Parts Manager >> Gemini Computer, TV, & Security Alarms >> (508)695-7302 >> (508)695-7769 FAX >> geminitv@xxxxxxxxxxxxxxxx >> geminitv@xxxxxxx >> www.geminicomputertvsecurityalarms.com >> >> >> ----- Original Message ----- >> From: "Ed" <edb3@xxxxxxx> >> To: <techassist@xxxxxxxxxxxxx> >> Sent: Friday, December 26, 2003 2:04 PM >> Subject: [TechAssist] Re: microwave >> >> >> > Cant seem to find a reason for this thing not to heat, unless the mag is >> > bad, i can measure continuity across the mag term, its not open, or >> > shorted.wiring seems to be ok, door switches are working, the hv cap >> checks >> > ok, so does the diode, hope someone has a idea. How much voltage should >> > there be at the magnatron filiment terminals? The hv xformer isnt E> shorted, >> > and the windings are not open >> > Ed Video Pro-Tech Mesa AZ >> > ----- Original Message ----- >> > From: "Doug Keller" <dek@xxxxxxxxxxxxxx> >> > To: <techassist@xxxxxxxxxxxxx> >> > Sent: Friday, December 26, 2003 8:32 AM >> > Subject: [TechAssist] Re: microwave >> > >> > >> > > May be a thermal sensor problem. Check them and also verify that the >> > > airflow can get through the fins of the magnetron and help it to cool. >> > > >> > > Doug Keller >> > > Wis-Kel Electronics >> > > 101 Freeland Ave. >> > > Terra Alta, WV >> > > USA 26764 >> > > dek@xxxxxxxxxxxxxx >> > > http://www.tech-assist.org >> > > "Learn from the mistakes of others, because you >> > > won't live long enough to make them all yourself" >> > > >> > > >> > > >> > > Ed wrote: >> > > >> > > >Really havent checked anything yet, have never workedon one, just >> wanted >> > to >> > > >get some ideas. I will pull it down later today, heated up a cup of >> > coffee >> > > >and it worked fine, the next cup it wouldnt heat, everything else is >> > running >> > > >ok. Does the magnatron usually go that fast? >> > > > Ed Video Pro-Tech >> > > > Mesa AZ >> > > >----- Original Message ----- >> > > >From: "Doug Keller" <dek@xxxxxxxxxxxxxx> >> > > >To: <techassist@xxxxxxxxxxxxx> >> > > >Sent: Friday, December 26, 2003 7:49 AM >> > > >Subject: [TechAssist] Re: microwave >> > > > >> > > > >> > > > >> > > > >> > > >>fuse?, power to trans?, HV? magnetron? What have you checked so far? >> > > >> >> > > >>Doug Keller >> > > >>Wis-Kel Electronics >> > > >>101 Freeland Ave. >> > > >>Terra Alta, WV >> > > >>USA 26764 >> > > >>dek@xxxxxxxxxxxxxx >> > > >>http://www.tech-assist.org >> > > >>"Learn from the mistakes of others, because you >> > > >>won't live long enough to make them all yourself" >> > > >> >> > > >> >> > > >> >> > > >>Ed wrote: >> > > >> >> > > >> >> > > >> >> > > >>>anyone here experianced on microwave ovens? This is a GE over the >> stove >> > > >>> >> > > >>> >> > > >type, quit heating this morning. Maybe there are some common failures E> i >> > > >should look for, its a 1998 model GE, model JVM1450WA >> > > > >> > > > >> > > >>> Ed Video Pro-Tech >> > > >>> Mesa AZ >> > > >>> >> > > >>> >> > > >> > >> >>>************************************************************************** >> > * >> > > >> >> > > >> >> > > >** >> > > > >> > > > >> > > >>>Lost Password: >> > > >>>http://www.tech-assist.org and select "Login Problems?". >> > > >>>Email Archives: >> > > >>>//www.freelists.org/archives/techassist/ >> > > >>> >> > > >>> >> > > >>> >> > > >>> >> > > >>> >> > > >>> >> > > >>> >> > > >> > >> >>*************************************************************************** >> > * >> > > >* >> > > > >> > > > >> > > >>Lost Password: >> > > >>http://www.tech-assist.org and select "Login Problems?". >> > > >>Email Archives: >> > > >>//www.freelists.org/archives/techassist/ >> > > >> >> > > >> >> > > >> >> > > > >> > > > >> > > >> > >> >>*************************************************************************** >> > ** >> > > >Lost Password: >> > > >http://www.tech-assist.org and select "Login Problems?". >> > > >Email Archives: >> > > >//www.freelists.org/archives/techassist/ >> > > > >> > > > >> > > > >> > > > >> > > > >> > > >> > >> E> **************************************************************************** >> > * >> > > Lost Password: >> > > http://www.tech-assist.org and select "Login Problems?". >> > > Email Archives: >> > > //www.freelists.org/archives/techassist/ >> > > >> > >> > >> > >> E> **************************************************************************** >> * >> > Lost Password: >> > http://www.tech-assist.org and select "Login Problems?". >> > Email Archives: >> > //www.freelists.org/archives/techassist/ >> > >> >> E> **************************************************************************** E> * >> Lost Password: >> http://www.tech-assist.org and select "Login Problems?". >> Email Archives: >> //www.freelists.org/archives/techassist/ >> E> ***************************************************************************** E> Lost Password: E> http://www.tech-assist.org and select "Login Problems?". E> Email Archives: E> //www.freelists.org/archives/techassist/ ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/